Account Navigation

Account Navigation

Currency - All prices are in AUD

Currency - All prices are in AUD
 Loading... Please wait...
OpenBuilds Part Store

CNC xPRO V3 Controller Stepper Driver

$178.79

CNC xPRO V3 Controller Stepper Driver

$178.79
SKU:
885
Share

Product Description

Take your builds to the next level with the all in one xPRO CNC Controller! 

labeled-xpro.jpg.png

 SPECS:

 

  • 4 stepper connections
  • Full to 1/32 stepping
  • Options for input and feedback include E-Stop/Reset, Feed Hold, Cycle Start, Homing Location (X,Y,Z Limits), and Z-Probing.
  • Spindle Direction and PWM Control output
  • Current limiting adjustments for each axis
  • Heatsinks installed
  • Latest stable version of GRBL installed

 

CNC xPRO V3 further expands the capabilities of the board and simplifies the users experience. 

 

NEW FEATURES (V3)

 

  • Redesigned silkscreen (more pictures, less words)
  • New/Improved FTDI serial USB interface
  • Auxiliary PC fan header (12/24VDC depending on supply voltage)
  • 100% Input buffering to include limit switches (prevent false triggers)
  • Motor driver output LEDs
  • Step/Dir breakout pads to add external drivers
  • Beefed up overvoltage/reverse voltage protection
  • Z-probe pin now accessible from screw terminal
  • Default set to mixed decay (easily changed to slow or fast with jumpers)
  • E-stop now tied to hardware and software
  • Uses the ATmega328PB (new version of the ATmega328, includes more timers, USART, etc)

 

*For CNC applications we recommend RN42-XV 
**5V output available with ATX PSU 

USE THE XPRO CNC CONTROLLER TO DRIVE: 

  • 4 Axis CNC Mill
  • 3 Axis CNC Mill With Multiple Drive Motors
  • Laser Cutter With XY, Auto Focus, and Rotary Attachment
  • Plasma Cutter 
  • Pick and Place for SMD components
  • Or wireless robotics (would love to see this used on a wireless quadruped) 

Be sure to check out all the exciting builds that could use this driver, over at OpenBuilds.com 

SOFTWARE:

The CNC xPRO is designed to run the opensource gcode interpreter GRBL, opensource programming environment Arduino, or anything you can write in AVR studio.  The xPRO comes pre-flashed with GRBL so all you need to do is wire up your motors! 

From the computer side we have found that ChiliPeppr - Grbl Panel - Universal-G-Code-Sender and GRBL Controller 3.0 work extremely well (and are free downloads). 

The software stack we use here at Spark is:

NOTE:"Please do not use the mass settings updater within GRBL 3.6.1, setting are not properly mapped for GRBL 0.9g"

Most of these are opensource! 

GETTING STARTED AND BASIC SETUP:

More information on OpenBuilds as well

NOTE: Accessories such as the BlueTooth, etc. Can be purchased from Spark-Concepts.com

Product Videos

Find Similar Products by Category