Smoothieboard 5xC v1.1
High performance, 32-bit controller, with a big focus on versatility.
Major advantages:1. Performance: 32-bit Microcontroller running at 120Mhz - far outperforms typical 8-bit/16Mhz controllers (Marlin,...
Mini Heated Bed
OpenBuilds Mini Heated Bed
This is a Really Cool Mini Heated Build Plate for Your Mini 3D Printer Builds & So Much More...
This 100 x 100mm hot plate is the perfect size and could be used for many projects, not...
DQ542MA Stepper Motor Driver
DQ542MA is a type of two-phase hybrid stepping motor driver
It is designed for use with 2-phase hybrid stepper motor of all kinds with 42mm to 86mm outside diameter and less than 4.0A phase current.
NEMA 23 Stepper Motor - High Torque Series
Take your projects to the next level with more power and strength with this new high torque 345oz/inch NEMA23 stepper motor.
OpenBuilds is proud to present its new high torque NEMA23 stepper motor. With 25.6kg / cm or...
CNC USB controller Mk3/4 (4 axis)
USB to CNC is now a reality! CNC motion controller is a link between personal computer and drivers for stepper motors. It uses a USB port which is available on all modern computers and laptops. This is a complete...
CNC xPRO V3 Controller Stepper Driver
Take your builds to the next level with the all in one xPRO CNC Controller!
4 stepper connections
Full to 1/32 stepping
Options for input and feedback include E-Stop/Reset, Feed Hold, Cycle...
16-2 Project Wire
16-AWG Stranded Copper Wire
Use this wire on the outputs (DC) of our power supplys to power various project circuit drivers. For example CNC driver boards.
Suitable for use as a signal wire connecting the amplifiers and...
24V /14.6A Meanwell Power Supply
Need power? This ultra low profile power supply delivers at a whopping 24 volts with 14.6 Amps!
This power supply will charge your stepper motors coils much faster and kick your machine into high gear.
Wire Cable - By the Foot
Choose between 3 and 4 Conductor sleeved stranded wire for your builds. These 24 guage cables are the perfect fit to drive your stepper motors or set up your limit switches, etc.
These cables are wrapped with a jacket...
NEMA 23 Stepper Motor
NEMA 23's are power houses when it comes to larger machines that need the extra torque.
This motor can be used on all sorts of projects that require a strong motor.
This motor is sure to push your builds to the next...
Micro Limit Switch
Micro Limit Switch Details:
Voltage: 125V / 250V
Dimensions: 0.79 in x 0.59 in x 0.24 in (2.0 cm x 1.5 cm x 0.6 cm)
Weight: 0.95 oz
NOTE: The holes in the plastic of the switch will need to be tapped...
Micro Limit Switch Kit with Mounting Plate
Micro Limit Switch Kit
1 Micro Limit Switches
1 Limit Switch Plate
2 M3 10mm Long Mounting Cap Screw
1 M5 8mm Low Profile Screw
1 Drop In Tee Nut
Micro Limit Switch Details:
12V/29A Meanwell Power Supply
Top of the line power supply. This ultra low profile power supply delivers 12V volts with 29A Amps
This is the idea power supply for most electronic setups.
It will super heat a 3D printer's extruder and...
NEMA 17 Stepper Motor
This is the Openbuilds custom NEMA 17 Stepper. This little motor packs a powerful punch at 76 oz of torque!
To make your builds easier, included are extra long 30" sheathed motor wires pre-crimped with a 4...
All prices are in SGD. © 2017 OpenBuilds Part Store | Sitemap
Powered by BigCommerce