Below are the available bulk discount rates for each individual item when you purchase a certain amount
- Buy 20 - 100 and get 18% off
- Buy 101 or above and get 20% off
The OpenBuilds Xtreme Mini Wheel is part of the heavy duty Xtreme line of OpenBuilds parts, designed with strength in mind.
These Xtreme Mini V's are made from very hard polycarbonate (clear) material which, due to its strong nature, will resist compression and wear and, in turn, leads to better overall precision and strength for your builds.
The Xtreme Wheels are designed to be used as a heavy duty alternative to the Delrin Wheels in applications such as CNC Routers/Mills where force and weight are introduced into the system. So, while the Delrin Mini V Wheels work great for most light load applications, the OpenBuilds Xtreme Mini Wheels can be used for builds where heavier loads are required and less compression in the delrin is desired.
Many of these wheels could be added to a gantry to allow an even distribution of the load across them.
Each wheel is carefully milled for consistent high precision and tolerance.
- (1) OpenBuilds Xtreme Mini Wheel
The Kit version of this wheel can be found here: http://openbuildspartstore.com/mini-v-wheel-kit/
The OpenBuilds Solid V Wheel Xtreme is great for use with the V-Slot Linear Guide System.
- Material - Polycarbonate (clear)
- Dimensions 15.23 OD x 9.974 +/- 0.026 ID x 8.8 'thick'
- Rockwell Hardness M 75
- Compressive Strengh 86Mpa
IMPORTANT Only use silicone for lubrication on these polycarbonate wheels if needed. DO NOT use synthetic lubricating oils or cutting oils.
Download Model Examples