The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

OpenBuilds®

OpenBuilds®

  • On Sale
    1/4" x 8mm Flexible Coupling

    OpenBuilds®

    1/4" x 8mm Flexible Coupling

    Now: A$8.37
    Was: A$9.85
    Flexible couplings are used to transmit torque from a stepper motor to a lead screw, thus creating the movement in an actuator.   Product Features 5 degree flexibility helps with...
    Now: A$8.37
    Was: A$9.85
  • On Sale
    12V/29A Meanwell Power Supply Bundle

    OpenBuilds®

    12V/29A Meanwell Power Supply Bundle

    Now: A$80.28
    Was: A$84.51
    The MeanWell family of power supplies represent the very best in power supply units. This specialized ultra low profile Power Supply set comes equipped standard with...
    Now: A$80.28
    Was: A$84.51
  • On Sale
    2 Hole Joining Strip Plate

    OpenBuilds®

    2 Hole Joining Strip Plate

    Now: A$2.52
    Was: A$2.80
    Strong external method used to connect up to 2 Linear Rail.  Can be positioned to suit application.  Connect the 20 mm spaced plate easily with 10mm Low Profile M5 Screw (sold...
    Now: A$2.52
    Was: A$2.80
  • On Sale
    24V Cooling Fan

    OpenBuilds®

    24V Cooling Fan

    Now: A$12.03
    Was: A$12.66
    Keep your controller and drivers cool with our 24v Cooling Fans.    Features Slimline Profile Great air volume What is Included (1) 24v Cooling Fan Product...
    Now: A$12.03
    Was: A$12.66
  • On Sale
    24V Meanwell Power Supply Bundle

    OpenBuilds®

    24V Meanwell Power Supply Bundle

    Now: A$93.66
    Was: A$98.59
    The MeanWell family of power supplies represent the very best in power supply units. This specialized ultra low profile Power Supply set comes equipped standard with...
    Now: A$93.66
    Was: A$98.59
  • On Sale
    3 Hole Joining Strip Plate

    OpenBuilds®

    3 Hole Joining Strip Plate

    Now: A$2.52
    Was: A$2.80
    Strong external method used to connect up to 3 Linear Rails.  Can be positioned to suit the application.  Holes spaced 20 mm apart connect to V-Slot Linear Rail easily with 10mm Low Profile...
    Now: A$2.52
    Was: A$2.80
  • On Sale
    3GT (GT2-3M) 9mm Timing Belt - Closed Loop

    OpenBuilds®

    3GT (GT2-3M) 9mm Timing Belt - Closed Loop

    Now: A$12.03
    Was: A$12.66
    Closed Loop 3GT Timing Belt are great for creating reductions or change ratios. Product Features Precise Positioning Precision registration Curvilinear belt tooth provides timing and indexing...
    Now: A$12.03
    Was: A$12.66
  • On Sale
    3GT (GT2-3M) Timing Belt - By the Foot

    OpenBuilds®

    3GT (GT2-3M) Timing Belt - By the Foot

    Now: A$4.68
    Was: A$4.92
    3GT Timing Belts are thick and robust with deep teeth grooves that provide a high torque for those large builds that require more power transmission. Product Features Precise...
    Now: A$4.68
    Was: A$4.92
  • On Sale
    3GT (GT2-3M) Timing Belt Spool

    OpenBuilds®

    3GT (GT2-3M) Timing Belt Spool

    Now: A$602.21
    Was: A$633.90
    3GT Timing Belts are thick and robust with deep teeth grooves that provide a high torque for those large builds that require more power transmission. Product Features Precise...
    Now: A$602.21
    Was: A$633.90
  • On Sale
    3GT (GT2-3M) Timing Pulley - 20 Tooth

    OpenBuilds®

    3GT (GT2-3M) Timing Pulley - 20 Tooth

    Now: A$9.35
    Was: A$9.85
    This 20 Tooth 3GT (GT2-3M) Timing Pulley has more aggressive teeth which can be used in higher torque applications. Product Features Light and sturdy 1/4” Bore fits NEMA 23 Stepper...
    Now: A$9.35
    Was: A$9.85
  • On Sale
    5mm * 8mm Flexible Coupling

    OpenBuilds®

    5mm * 8mm Flexible Coupling

    Now: A$8.37
    Was: A$9.85
    These Flexible couplings are used to transmit torque from a stepper motor to a lead screw, thus creating the movement in an actuator.   Product Features Adds approximately 5% flexibility...
    Now: A$8.37
    Was: A$9.85
  • On Sale
    6 ft. Power Cord

    OpenBuilds®

    6 ft. Power Cord

    Now: A$7.09
    Was: A$7.45
    Standard 3 prong Power Cord used in various types of power supplies including our Meanwell. Product Features Thick Cable and neck to prevent from breaking   What is Included (1) 6 ft...
    Now: A$7.09
    Was: A$7.45
  • On Sale
    8mm Metric Acme Lead Screw

    OpenBuilds®

    8mm Metric Acme Lead Screw

    Now: A$14.71
    Was: A$15.48
    These precision trapezoidal 8mm metric lead screws are a perfect combination of high torque and speed.   Product Features Large diameter helps eliminate whipping High...
    Now: A$14.71
    Was: A$15.48
  • On Sale
    90 Degree Joining Plate

    OpenBuilds®

    90 Degree Joining Plate

    Now: A$6.33
    Was: A$7.03
    Square up your joints with 90 degree precision.  Mounts externally to V-Slot Linear Rail with 10mm Low Profile M5 Screw and M5 Tee Nuts (sold separately) Product Features Thick and sturdy...
    Now: A$6.33
    Was: A$7.03
  • On Sale
    ACRO Acrylic Plate Set

    OpenBuilds®

    ACRO Acrylic Plate Set

    Now: A$34.22
    Was: A$38.02
    Get your ACRO system together quickly and easily with the included 11-piece plate set.  Use these plates on your own design or as replacement parts for your ACRO System. Product...
    Now: A$34.22
    Was: A$38.02
  • On Sale
    NEW
    Adjustable V-Slot  Hinge

    OpenBuilds®

    Adjustable V-Slot Hinge

    Now: A$5.97
    Was: A$7.03
    The Adjustable hinges help expand your Build to include angled connections between Linear Rails giving you many more possibilities to accommodate a certain geometry. Product Features Break away...
    Now: A$5.97
    Was: A$7.03
  • On Sale

    OpenBuilds®

    Allen Wrench

    Now: A$0.39
    Was: A$0.41
    Add this Allen Wrenches to your tools box and always have the perfect width when assembling your build. Product Features Six contact surfaces Suitable for regular and set screws Either end can...
    Now: A$0.39
    Was: A$0.41
  • On Sale
    Aluminum Spacers (10 Pack)

    OpenBuilds®

    Aluminum Spacers (10 Pack)

    Now: A$2.80
    Was: A$3.51
    Aluminum spacers used throughout our system to ensure precision alignment and spacing between components. Product Features Rigid to maintain stability during motion Lightweight, non-magnetic and...
    Now: A$2.80
    Was: A$3.51
  • On Sale
    Ball Bearing 625 2RS 5x16x5

    OpenBuilds®

    Ball Bearing 625 2RS 5x16x5

    Now: A$1.11
    Was: A$1.39
    These bearings are the center piece used in all of our full size wheel kits and also suitable for many any other applications.   Product Features Deep groove geometry for high speed and...
    Now: A$1.11
    Was: A$1.39
  • On Sale
    Ball Bearing 688Z  8x16x5

    OpenBuilds®

    Ball Bearing 688Z 8x16x5

    Now: A$1.11
    Was: A$1.39
    These bearings fit perfectly when coupled with our recessed plates and are designed to work with other applications such as the 8mm Acme Lead Screw.  Product Features Used in conjunction...
    Now: A$1.11
    Was: A$1.39
  • On Sale
    Builders Pick
    Balldriver Screw Driver Set

    OpenBuilds®

    Balldriver Screw Driver Set

    Now: A$20.06
    Was: A$21.12
    The most convenient Balldriver screw set to have around when making your build and never have to worry about not having the size needed.   Product Features ComfortGrip handles designed...
    Now: A$20.06
    Was: A$21.12
  • On Sale
    Belt Clamp Crimp Style

    OpenBuilds®

    Belt Clamp Crimp Style

    Now: A$0.79
    Was: A$0.83
    Create a solid and secure belt loop with one of our Belt Clamp Crimp. Product Features Metal for a strong bind Pre-Bent for Easier Install   What is Included (1) Belt Clamp Crimp...
    Now: A$0.79
    Was: A$0.83
  • On Sale
    BlackBox Motion Control System

    OpenBuilds®

    BlackBox Motion Control System

    Now: A$139.46
    Was: A$211.29
    Welcome to the future in CNC machine control.  Our all-in-one plug and play OpenBuilds BlackBox Motion Control System is revolutionizing CNC. CNC Routers, Plasma Cutters, Laser Cutters or...
    Now: A$139.46
    Was: A$211.29
  • On Sale
    Build Plate

    OpenBuilds®

    Build Plate

    Now: A$24.07
    Was: A$26.75
    Large format universal mounting platform.  Suitable for heated beds and any applications requiring larger mounting surface.  Compatible with all sizes of V-Slot Linear Rail.  Product...
    Now: A$24.07
    Was: A$26.75
  • On Sale
    Button Head Screws M3 (10 Pack)

    OpenBuilds®

    Button Head Screws M3 (10 Pack)

    Now: A$1.11
    Was: A$1.39
    Used in all of our machines and components this family of button head screws are necessary and very useful for building modular systems.   Product Features Made of a steel alloy it is...
    Now: A$1.11
    Was: A$1.39
  • On Sale
    C-Beam® Gantry Plate

    OpenBuilds®

    C-Beam® Gantry Plate

    Now: A$12.66
    Was: A$14.07
    Accommodates up to 4 mini v wheels.  Easily configured to station wheels inside  C-Beam Linear Rail track for a compact gantry cart footprint.  Alternate the mounting on slimmer V-Slot...
    Now: A$12.66
    Was: A$14.07
  • On Sale
    C-Beam® Gantry Plate - Double Wide

    OpenBuilds®

    C-Beam® Gantry Plate - Double Wide

    Now: A$17.74
    Was: A$19.71
    Expanding on the popular C-Beam gantry plate, this double wide version can host up to 8 Mini V Wheels for an exceptionally stable gantry.  Elongated to provide even more mounting surface. ...
    Now: A$17.74
    Was: A$19.71
  • On Sale
    C-Beam® Riser Plates

    OpenBuilds®

    C-Beam® Riser Plates

    Now: A$7.59
    Was: A$8.44
    A key component used to attach C-Beam Gantry Plates to a C-Beam Shield.   Pre-threaded holes and center recess allows for flush mounting a top plate.  Each set contains 2 riser plates...
    Now: A$7.59
    Was: A$8.44
  • On Sale

    OpenBuilds®

    Cable Ties (10 Pack)

    Now: A$1.06
    Was: A$1.11
    Cable Ties to keep the wires on your Build looking nice and neat. Product Features   Flexible to accommodate any need Strong fastener What is Included (10) Cable Ties Product...
    Now: A$1.06
    Was: A$1.11
  • On Sale
    Cast Acrylic - Black

    OpenBuilds®

    Cast Acrylic - Black

    Now: A$15.20
    Was: A$16.89
    Make some stunning projects with our Black Cast Acrylic sheets. They are perfectly suited for cnc router machining or laser cutting / engraving and are very popular in the sign and trophy industry as...
    Now: A$15.20
    Was: A$16.89
  • On Sale
    Cast Acrylic - Blue

    OpenBuilds®

    Cast Acrylic - Blue

    Now: A$15.20
    Was: A$16.89
    Make some stunning projects with our Blue Cast Acrylic sheets. They are perfectly suited for cnc router machining or laser cutting / engraving and are very popular in the sign and trophy industry as...
    Now: A$15.20
    Was: A$16.89
  • On Sale
    Cast Acrylic - Clear

    OpenBuilds®

    Cast Acrylic - Clear

    Now: A$15.20
    Was: A$16.89
    Make some stunning projects with our Clear Cast Acrylic sheets. They are perfectly suited for cnc router machining or laser cutting / engraving and are very popular in the sign and trophy industry as...
    Now: A$15.20
    Was: A$16.89
  • On Sale
    Cast Acrylic - Green

    OpenBuilds®

    Cast Acrylic - Green

    Now: A$15.20
    Was: A$16.89
    Make some stunning projects with our Green Cast Acrylic sheets. They are perfectly suited for cnc router machining or laser cutting / engraving and are very popular in the sign and trophy industry as...
    Now: A$15.20
    Was: A$16.89
  • On Sale
    Cast Acrylic - Red

    OpenBuilds®

    Cast Acrylic - Red

    Now: A$15.20
    Was: A$16.89
    Make some stunning projects with our Red Cast Acrylic sheets. They are perfectly suited for cnc router machining or laser cutting / engraving and are very popular in the sign and trophy industry as...
    Now: A$15.20
    Was: A$16.89
  • On Sale
    Cast Acrylic - White

    OpenBuilds®

    Cast Acrylic - White

    Now: A$15.20
    Was: A$16.89
    Make some stunning projects with our White Cast Acrylic sheets. They are perfectly suited for cnc router machining or laser cutting / engraving and are very popular in the sign and trophy industry...
    Now: A$15.20
    Was: A$16.89
  • On Sale
    Cast Acrylic - Yellow

    OpenBuilds®

    Cast Acrylic - Yellow

    Now: A$15.20
    Was: A$16.89
    Make some stunning projects with our Yellow Cast Acrylic sheets. They are perfectly suited for cnc router machining or laser cutting / engraving and are very popular in the sign and trophy industry...
    Now: A$15.20
    Was: A$16.89
  • On Sale
    CNC xPRO V4 Controller Stepper Driver

    OpenBuilds®

    CNC xPRO V4 Controller Stepper Driver

    Now: A$200.73
    Was: A$211.29
    The xPRO V4 Controller Stepper Driver its an all in one controller with all the necessary features to get you up and running in your build quickly and reliably Product Features Introduced with...
    Now: A$200.73
    Was: A$211.29
  • On Sale
    Cross Joining Plate

    OpenBuilds®

    Cross Joining Plate

    Now: A$7.59
    Was: A$8.44
    Creates a junction with up to 4 Linear Rail.  Can be repositioned to suit your application.  Connect easily with 10mm Low Profile M5 Screw (sold separately)  Product Features Thick...
    Now: A$7.59
    Was: A$8.44
  • On Sale

    OpenBuilds®

    Delrin Mini V Wheel

    Now: A$1.68
    Was: A$2.10
    The smooth and precise Delrin wheel works best for light load applications. Small and compact, designed specifically to ride inside the V Shaped profile of V-Slot Linear...
    Now: A$1.68
    Was: A$2.10
  • On Sale
    Delrin Mini V Wheel Kit

    OpenBuilds®

    Delrin Mini V Wheel Kit

    Now: A$4.83
    Was: A$6.04
    A complete kit that includes everything you need for assembly. The smooth and precise Delrin wheel works best for light load applications.  Small and compact, designed specifically to ride...
    Now: A$4.83
    Was: A$6.04
  • On Sale

    OpenBuilds®

    Delrin V Wheel

    Now: A$2.69
    Was: A$3.37
    The smooth and precise Delrin wheel works best for light load applications. Standard size provides smooth motion when paired with OpenBuilds Linear Rail. V Shaped profile...
    Now: A$2.69
    Was: A$3.37
  • On Sale
    Delrin V Wheel Kit

    OpenBuilds®

    Delrin V Wheel Kit

    Now: A$5.62
    Was: A$7.03
    A complete kit that includes everything you need for assembly. The smooth and precise Delrin wheel works best for light load applications.  Standard size provides smooth motion when...
    Now: A$5.62
    Was: A$7.03
  • On Sale

    OpenBuilds®

    DeWALT DWP611 Compact Router

    Now: A$186.00
    Was: A$195.80
    This is our go to router for most of our machines kits.  We have found that with the variable setting, we can quickly dial in any RPM changes needed for different material types...
    Now: A$186.00
    Was: A$195.80
  • On Sale
    Double Tee Nut

    OpenBuilds®

    Double Tee Nut

    Now: A$0.77
    Was: A$0.97
    Slide in Double Tee Nuts are a fundamental part of every build adding more flexibility to our system modularity.   Product Features Add any accessory or part along the length of a V-Slot...
    Now: A$0.77
    Was: A$0.97
  • On Sale
    Double Wide Gantry Kit

    OpenBuilds®

    Double Wide Gantry Kit

    Now: A$86.76
    Was: A$98.59
    For the most demanding builds, our C-Beam Double Gantry Set is the ideal Linear Actuator gantry where a strong, solid and stable operation is needed. This one is used on the Z Axis on our...
    Now: A$86.76
    Was: A$98.59
  • On Sale
    DQ542MA Stepper Motor Driver

    OpenBuilds®

    DQ542MA Stepper Motor Driver

    Now: A$53.52
    Was: A$56.33
    The DQ542MA Stepper Motor Driver is a type of two-phase hybrid stepping motor driver. It is designed for use with 2-phase hybrid stepper motor of all kinds with 42mm to 86mm outside diameter and...
    Now: A$53.52
    Was: A$56.33
  • On Sale
    Drag Chain Cable Carrier

    OpenBuilds®

    Drag Chain Cable Carrier

    Now: A$10.69
    Was: A$11.26
    This Drag / Cable Chaing Carrier is a great solution to tidy up the wires of your Builds. Product Features Easy open design that allows for direct tray access. Low profile size, non obtrusive...
    Now: A$10.69
    Was: A$11.26
  • On Sale
    Drill Taps

    OpenBuilds®

    Drill Taps

    Now: A$11.37
    Was: A$11.96
    Get your driver/drill out and load it with any of our Drill Taps, this are specially good for tapping the ends of any of our V-Slot or C-Beams Linear Rail Fast. Pro-Tip: Be sure that your drill is...
    Now: A$11.37
    Was: A$11.96
  • On Sale
    Drop In Tee Nuts

    OpenBuilds®

    Drop In Tee Nuts

    Now: A$1.11
    Was: A$1.39
    Did you forget to add a Tee Nut? Drop In Tee Nuts are here to save you, just add them to any location on a V-Slot Linear Rail.   Product Features Add any accessory or part along the length...
    Now: A$1.11
    Was: A$1.39
  • On Sale
    Eccentric Spacer

    OpenBuilds®

    Eccentric Spacer

    Now: A$2.24
    Was: A$2.80
    These Eccentric Spacers are the perfect solution for creating a pre-load from the V-Wheels to the V-Slot Linear Rail. Pro-Tip: Eccentric Spacers comes with a divot on the outside...
    Now: A$2.24
    Was: A$2.80
  • On Sale
    End Cap

    OpenBuilds®

    End Cap

    Now: A$2.38
    Was: A$2.80
    Cover the bare end of V-Slot Linear Rail and give your Build that pro touch.  Each 20 x 20mm end cap features recessed center hole to flush mount an self tapping screw (not included).  Use...
    Now: A$2.38
    Was: A$2.80
  • On Sale
    Flanged Bearing 688ZZ 8x16x5

    OpenBuilds®

    Flanged Bearing 688ZZ 8x16x5

    Now: A$1.45
    Was: A$1.82
    These bearings fit perfectly when coupled with any plate with a 16mm hole. Designed to work with applications such as the 8mm Acme Lead Screw.   Product...
    Now: A$1.45
    Was: A$1.82
  • On Sale
    Flat Washer 1/4" Screw Size

    OpenBuilds®

    Flat Washer 1/4" Screw Size

    Now: A$0.21
    Was: A$0.27
    Flat Washers come in handy when there a need to maintain distributed pressure among a surface.   Product Features Prevents damaging the surface being under pressure Ensure tightness and...
    Now: A$0.21
    Was: A$0.27
  • On Sale
    Flexible Corrugated Tubing

    OpenBuilds®

    Flexible Corrugated Tubing

    Now: A$1.06
    Was: A$1.11
    Conceal and organize all your electronic wires with our Flexible Corrugated Tubing.   Product Features Multiple color to choose form and personalize your build Easy mountable using...
    Now: A$1.06
    Was: A$1.11
  • On Sale
    Flexible Tubing Clamps

    OpenBuilds®

    Flexible Tubing Clamps

    Now: A$1.07
    Was: A$1.25
    These are the clamps we use to firmly hold the Flexible Corrugated Tubing for short wire runs on our Builds. The rubber lining holds the tubing tightly while allow flex in the tube runs on...
    Now: A$1.07
    Was: A$1.25
  • OpenBuilds®

    G-H-O-S-T

    A$70.42
    BlackBox GhostCase Easter Egg NOTE:  Only those who crack the Easter Egg and receive a special code are eligible to receive this Ghost Case offer. For those looking to attempt to crack the...
    A$70.42
  • On Sale
    GT2-2M Timing Belt - By the Foot

    OpenBuilds®

    GT2-2M Timing Belt - By the Foot

    Now: A$3.34
    Was: A$3.51
    There is no limit to the types of linear motion you can create by making an actuator based on one of these GT2-2M Timing Belts.  They are popular for fast and lightweight movement. Product...
    Now: A$3.34
    Was: A$3.51
  • On Sale
    GT2-2M Timing Belt Spool

    OpenBuilds®

    GT2-2M Timing Belt Spool

    Now: A$508.53
    Was: A$535.29
    There is no limit to the types of linear motion you can create by making an actuator based on one of this GT2-2M Belts, popular for fast and lightweight movement. Product Features Precise...
    Now: A$508.53
    Was: A$535.29
  • On Sale
    GT2-2M Timing Pulley - 14 Tooth

    OpenBuilds®

    GT2-2M Timing Pulley - 14 Tooth

    Now: A$6.68
    Was: A$7.03
    This 14 Tooth GT2-2M Timing Pulley is great for any build but especially for those high-resolution applications. Product Features Light and sturdy High accuracy position Smooth...
    Now: A$6.68
    Was: A$7.03
  • On Sale
    GT2-2M Timing Pulley - 20 Tooth

    OpenBuilds®

    GT2-2M Timing Pulley - 20 Tooth

    Now: A$8.02
    Was: A$8.44
    This 20 Tooth GT2-2M Timing Pulley is great for any build but especially for those high-resolution applications Product Features Light and sturdy High accuracy position Smooth...
    Now: A$8.02
    Was: A$8.44
  • On Sale
    GT2-2M Timing Pulley - 30 Tooth

    OpenBuilds®

    GT2-2M Timing Pulley - 30 Tooth

    Now: A$9.35
    Was: A$9.85
    This 30 Tooth GT2-2M Timing Pulley is great for any build but especially for those with high-resolution applications. Product Features Light and sturdy High accuracy position Smooth...
    Now: A$9.35
    Was: A$9.85
  • On Sale
    Hex Standoff - M3 (4 Pack)

    OpenBuilds®

    Hex Standoff - M3 (4 Pack)

    Now: A$0.77
    Was: A$0.97
    Purpose built and rigid, these nylon standoffs are threaded to accommodate M3 bolts and are designed for use with any application where M3 size standoffs are needed. A typical use for these standoffs...
    Now: A$0.77
    Was: A$0.97
  • On Sale
    Idler Pulley Plate

    OpenBuilds®

    Idler Pulley Plate

    Now: A$8.86
    Was: A$9.85
    This plate gives you a mountable yet movable location for a Smooth Idler Pulley. This works great as it allows you to easily tension your belt. Product Features Quick assembly of motion...
    Now: A$8.86
    Was: A$9.85
  • On Sale
    Inside Hidden Corner Bracket

    OpenBuilds®

    Inside Hidden Corner Bracket

    Now: A$2.38
    Was: A$2.80
    These Inside Hidden Corner brackets are ideal for creating 90 degree connections between linear rails, making them not visible from the outside of the frame on your build. Product Features...
    Now: A$2.38
    Was: A$2.80
  • On Sale

    OpenBuilds®

    IOT Switching Relay Power Strip

    Now: A$37.46
    Was: A$39.43
    IOT Relay allows you to control an AC power outlet from a simple signal wire. This allows you to automatically turn on/off the AC power to devices on your system like vacuums and...
    Now: A$37.46
    Was: A$39.43
  • On Sale
    Jog Knob

    OpenBuilds®

    Jog Knob

    Now: A$5.97
    Was: A$7.03
    Attach our Jog Knobs to end the of a Lead Screw that’s part of an actuatorto manually fine tune your machines positions.   Product Features Can be used in a X/Y table...
    Now: A$5.97
    Was: A$7.03
  • On Sale
    L Bracket

    OpenBuilds®

    L Bracket

    Now: A$1.55
    Was: A$1.82
    These L Brackets provide a lot of flexibility.  They can be used to secure two components together at 90 degrees or as support for a spoiler board on a CNC Machine. Product Features Can...
    Now: A$1.55
    Was: A$1.82
  • On Sale
    LEAD CNC 1010 (40" x 40")

    OpenBuilds®

    LEAD CNC 1010 (40" x 40")

    Now: A$1,584.77
    Was: A$1,760.83
    window.SHOGUN_IMAGE_ELEMENTS = window.SHOGUN_IMAGE_ELEMENTS || new Array(); window.SHOGUN_IMAGE_ELEMENTS.push({ hoverImage: '', uuid:...
    Now: A$1,584.77
    Was: A$1,760.83
  • On Sale
    Linear Actuator End Mount

    OpenBuilds®

    Linear Actuator End Mount

    Now: A$13.93
    Was: A$15.48
    The ultimate end mount to build your horizontal and/or vertical NEMA 17 belt driven linear actuator.  Stamped and folded aluminum mount is best suited for 20X40mm V-Slot Linear Rail. Product...
    Now: A$13.93
    Was: A$15.48
  • On Sale
    Lock Collar

    OpenBuilds®

    Lock Collar

    Now: A$1.18
    Was: A$1.39
    Lock Collars are used to create mechanical stops at any location along a shaft or to secure components to it. A popular use is to lock the 8mm Lead Screw place. Product Features One piece for...
    Now: A$1.18
    Was: A$1.39
  • On Sale
    Low Profile Screws M5 (10 Pack)

    OpenBuilds®

    Low Profile Screws M5 (10 Pack)

    Now: A$1.45
    Was: A$1.82
    These are the screws you need to secure all your components in your build, and we carry different lengths to match your need.   Product Features Low profile means great clearance Strong...
    Now: A$1.45
    Was: A$1.82
  • On Sale
    M3 Cap Head Screws

    OpenBuilds®

    M3 Cap Head Screws

    Now: A$0.32
    Was: A$0.41
    These screws are high strength fasteners intended for demanding mechanical applications. As an example, we have used this this screw in combination with 1.5" Aluminum Spacers to mount Nema...
    Now: A$0.32
    Was: A$0.41
  • On Sale
    Metal V Wheel

    OpenBuilds®

    Metal V Wheel

    Now: A$8.66
    Was: A$10.83
    Crafted with carbon steel 45 to endure frequent usage with heavy duty materials such as hardened steel rails or round steel rod linear ways.    Product Features Precision...
    Now: A$8.66
    Was: A$10.83
  • On Sale
    Metal V Wheel Kit

    OpenBuilds®

    Metal V Wheel Kit

    Now: A$11.26
    Was: A$14.07
    A complete kit that includes everything you need for assembly. Crafted with carbon steel 45 to endure frequent usage with heavy duty materials such as hardened steel rails or round steel rod...
    Now: A$11.26
    Was: A$14.07
  • On Sale
    Micro Fuse 10A

    OpenBuilds®

    Micro Fuse 10A

    Now: A$0.66
    Was: A$0.69
    A standard Mini Blade Fuse, rated at 10A for protecting your OpenBuilds BlackBox Controller or other electronics.   Fits into standard APM/ATM Mini Fuse Holders only. For use with DC Low...
    Now: A$0.66
    Was: A$0.69
  • On Sale
    Micro Limit Switch

    OpenBuilds®

    Micro Limit Switch

    Now: A$2.66
    Was: A$2.80
    Our Micro Limit Switches are a basic part of any CNC build where homing, boundaries and security interlock are needed. Product Features Can be connected as NO or NC Small form...
    Now: A$2.66
    Was: A$2.80
  • On Sale
    Micro Limit Switch Kit

    OpenBuilds®

    Micro Limit Switch Kit

    Now: A$6.68
    Was: A$7.03
    Our Micro Limit Switches are a basic part of any CNC build where homing, boundaries and security interlocks are needed. Product Features Kit includes all parts needed for fast install Easily...
    Now: A$6.68
    Was: A$7.03
  • On Sale
    Micro Limit Switch Plate

    OpenBuilds®

    Micro Limit Switch Plate

    Now: A$2.52
    Was: A$2.80
    These Limit Switch Plates are designed for mounting to V-Slot Linear Rail or C-Beam Rail and give you multiple ways to mount and arrange your switches along the length of the linear guide...
    Now: A$2.52
    Was: A$2.80
  • On Sale
    Mini Ball Bearing 105zz 5x10x4

    OpenBuilds®

    Mini Ball Bearing 105zz 5x10x4

    Now: A$1.11
    Was: A$1.39
    These bearings are the center piece used on our Mini V Wheel Kits and also suitable for any other applications requiring a small diameter bearing   Product Features Rated to withstand as...
    Now: A$1.11
    Was: A$1.39
  • On Sale
    Mini Heated Bed

    OpenBuilds®

    Mini Heated Bed

    Now: A$13.37
    Was: A$14.07
    Small in size, big in power. Our Mini Heated Bed is a great option for any compact 3D printer build. Product Features Dual Side Ruler on surface as guide   What is Included (1) Mini...
    Now: A$13.37
    Was: A$14.07
  • On Sale
    Mini V Gantry Kit

    OpenBuilds®

    Mini V Gantry Kit

    Now: A$40.89
    Was: A$46.47
    This Mini V Gantry Set is part of the Mini V Linear Actuator System to allow for quick assembly of lightweight machine builds where high speed is in order. ...
    Now: A$40.89
    Was: A$46.47
  • On Sale
    Mini V Gantry Plate

    OpenBuilds®

    Mini V Gantry Plate

    Now: A$11.40
    Was: A$12.66
    Professionally designed with time saving features.  Easy to mount with 5 pre-threaded M5 mounting holes. Belt loop notches for quick connection of timing belt.  Two oversized recessed holes...
    Now: A$11.40
    Was: A$12.66
  • On Sale
    Mini V Wheel Precision Shim

    OpenBuilds®

    Mini V Wheel Precision Shim

    Now: A$0.21
    Was: A$0.27
    These Precision Shims create the perfect fill and alignment on our Mini V Wheel Kits.   Product Features Reduce wear and prevents binding Creates a tighter fit among parts What is...
    Now: A$0.21
    Was: A$0.27
  • On Sale
    Motor Mount Plate - NEMA 17 Stepper Motor

    OpenBuilds®

    Motor Mount Plate - NEMA 17 Stepper Motor

    Now: A$8.86
    Was: A$9.85
    Easily mount a NEMA 17 Stepper motor onto any plate or V-Slot Linear to create a belt & pinion or any other type of actuator. Product Features Slots to easy tension adjustment Multiple holes...
    Now: A$8.86
    Was: A$9.85
  • On Sale
    Motor Mount Plate - NEMA 23 Stepper Motor

    OpenBuilds®

    Motor Mount Plate - NEMA 23 Stepper Motor

    Now: A$10.13
    Was: A$11.26
    Easily mount a NEMA 23 Stepper motor onto any plate or V-Slot to create a belt & pinion or any other type of actuator. Product Features Slots to easy tension adjustment Multiple holes to...
    Now: A$10.13
    Was: A$11.26
  • On Sale
    Mounting Hub (5mm)

    OpenBuilds®

    Mounting Hub (5mm)

    Now: A$4.78
    Was: A$5.62
    Create a simple Lead Screw Linear Actuator by attaching this Mounting Hub to any Linear Rail end or one of our Linear Actuator End Mount. What is Included (1) Mounting Hub (2) M5 Set...
    Now: A$4.78
    Was: A$5.62
  • On Sale
    NEMA 17 Stepper Motor

    OpenBuilds®

    NEMA 17 Stepper Motor

    Now: A$24.07
    Was: A$25.34
    This custom Openbuilds NEMA 17 Stepper Motor is a great choice for your lighter duty high precision CNC projects.   Product Features Plug and Play Xtension connector for easy...
    Now: A$24.07
    Was: A$25.34
  • On Sale
    NEMA 23 Stepper Motor

    OpenBuilds®

    NEMA 23 Stepper Motor

    Now: A$37.46
    Was: A$39.43
    This custom Openbuilds NEMA 23 Stepper Motor it’s the stepper of choice for larger build requiring more power.   Product Features Plug and Play Xtension connector for easy and fast...
    Now: A$37.46
    Was: A$39.43
  • On Sale
    Nut Block for 8mm Metric Acme Lead Screw

    OpenBuilds®

    Nut Block for 8mm Metric Acme Lead Screw

    Now: A$10.03
    Was: A$10.55
    This 8mm Acme Nut Block is a great choice for any Build requiring lead screw linear motion.   Product Features Recesses screw holes for non obtrusive placement Can be mounted on...
    Now: A$10.03
    Was: A$10.55
  • On Sale
    Nut Plate for 8mm Metric Acme Lead Screw

    OpenBuilds®

    Nut Plate for 8mm Metric Acme Lead Screw

    Now: A$9.35
    Was: A$9.85
    This V-Slot Acme Nut Plate is a perfect fit for any integrated Lead Screw transmission project.  It can fit into the hollow inserts of 20x40, 20x60 and 20x80 V-Slot Linear Rail. Product...
    Now: A$9.35
    Was: A$9.85
  • On Sale
    Nylon Insert Hex Locknut - M3 (10 Pack)

    OpenBuilds®

    Nylon Insert Hex Locknut - M3 (10 Pack)

    Now: A$1.11
    Was: A$1.39
    These Nylon locknuts contain a washer mounted inside the nut that enhances its hold on the nut. Product Features Nylon washer insert will hold the M3 in place preventing slippage or loosing of...
    Now: A$1.11
    Was: A$1.39
  • On Sale
    Nylon Spacers (10 Pack)

    OpenBuilds®

    Nylon Spacers (10 Pack)

    Now: A$2.24
    Was: A$2.80
    Nylon spacers are perfectly suited were non-conductive applications are needed and/or as standoff for electronic components. Product Features Achieve precise spacing between components Protect...
    Now: A$2.24
    Was: A$2.80
  • On Sale
    OpenBuilds 8mm Spanner Wrench

    OpenBuilds®

    OpenBuilds 8mm Spanner Wrench

    Now: A$4.00
    Was: A$4.21
    The perfect tool when assembling your build while tightening a hex nut or adjusting the eccentrics.   Product Features Slim profile design Sturdy to withstand necessary torque What...
    Now: A$4.00
    Was: A$4.21