The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

OpenBuilds®

OpenBuilds®

  • 1/4" x 8mm Flexible Coupling

    OpenBuilds®

    1/4" x 8mm Flexible Coupling

    R$26.49
    Flexible couplings are used to transmit torque from a stepper motor to a lead screw, thus creating the movement in an actuator.   Product Features 5 degree flexibility helps with...
    R$26.49
  • 2 Hole Joining Strip Plate

    OpenBuilds®

    2 Hole Joining Strip Plate

    R$7.54
    Strong external method used to connect up to 2 Linear Rail.  Can be positioned to suit application.  Connect the 20 mm spaced plate easily with 10mm Low Profile M5 Screw (sold...
    R$7.54
  • 24V Cooling Fan

    OpenBuilds®

    24V Cooling Fan

    R$34.07
    Keep your controller and drivers cool with our 24v Cooling Fans.    Features Slimline Profile Great air volume What is Included (1) 24v Cooling Fan Product...
    R$34.07
  • 3 Hole Joining Strip Plate

    OpenBuilds®

    3 Hole Joining Strip Plate

    R$7.54
    Strong external method used to connect up to 3 Linear Rails.  Can be positioned to suit the application.  Holes spaced 20 mm apart connect to V-Slot Linear Rail easily with 10mm Low...
    R$7.54
  • 3GT (GT2-3M) Timing Belt Spool

    OpenBuilds®

    3GT (GT2-3M) Timing Belt Spool

    R$1,705.55
    3GT Timing Belts are thick and robust with deep teeth grooves that provide a high torque for those large builds that require more power transmission. Product Features Precise...
    R$1,705.55
  • 5mm * 8mm Flexible Coupling

    OpenBuilds®

    5mm * 8mm Flexible Coupling

    R$26.49
    These Flexible couplings are used to transmit torque from a stepper motor to a lead screw, thus creating the movement in an actuator.   Product Features Adds approximately 5% flexibility...
    R$26.49
  • 6 ft. Power Cord

    OpenBuilds®

    6 ft. Power Cord

    R$20.05
    Standard 3 prong Power Cord used in various types of power supplies including our Meanwell Product Features Thick Cable and neck to prevent from breaking   What is Included (1) 6 ft...
    R$20.05
  • 90 Degree Joining Plate

    OpenBuilds®

    90 Degree Joining Plate

    R$18.91
    Square up your joints with 90 degree precision.  Mounts externally to V-Slot Linear Rail with 10mm Low Profile M5 Screw and M5 Tee Nuts (sold separately) Product Features Thick and sturdy...
    R$18.91
  • ACRO Acrylic Plate Set

    OpenBuilds®

    ACRO Acrylic Plate Set

    R$102.30
    Get your ACRO system together quickly and easily with the included 11-piece plate set.  Use these plates on your own design or as replacement parts for your ACRO System. Product...
    R$102.30
  • NEW
    Adjustable V-Slot  Hinge

    OpenBuilds®

    Adjustable V-Slot Hinge

    R$18.91
    The Adjustable hinges help expand your Build to include angled connections between Linear Rails giving you many more possibilities to accommodate a certain geometry. Product Features Break away...
    R$18.91
  • OpenBuilds®

    Allen Wrench

    R$1.10
    Add this Allen Wrenches to your tools box and always have the perfect width when assembling your build. Product Features Six contact surfaces Suitable for regular and set screws Either end can...
  • Aluminum Spacers (10 Pack)

    OpenBuilds®

    Aluminum Spacers (10 Pack)

    R$9.44
    Aluminum spacers used throughout our system to ensure precision alignment and spacing between components. Product Features Rigid to maintain stability during motion Lightweight, non-magnetic...
  • Ball Bearing 625 2RS 5x16x5

    OpenBuilds®

    Ball Bearing 625 2RS 5x16x5

    R$3.75
    These bearings are the center piece used in all of our full size wheel kits and also suitable for many any other applications.   Product Features Deep groove geometry for high speed and...
    R$3.75
  • Ball Bearing 688Z  8x16x5

    OpenBuilds®

    Ball Bearing 688Z 8x16x5

    R$3.75
    These bearings fit perfectly when coupled with our recessed plates and are designed to work with other applications such as the 8mm Acme Lead Screw.  Product Features Used in conjunction...
    R$3.75
  • Builders Pick
    Balldriver Screw Driver Set

    OpenBuilds®

    Balldriver Screw Driver Set

    R$56.82
    The most convenient Balldriver screw set to have around when making your build and never have to worry about not having the size needed.   Product Features ComfortGrip handles designed...
    R$56.82
  • Belt Clamp Crimp Style

    OpenBuilds®

    Belt Clamp Crimp Style

    R$2.24
    Create a solid and secure belt loop with one of our Belt Clamp Crimp. Product Features Metal for a strong bind Pre-Bent for Easier Install   What is Included (1) Belt Clamp Crimp...
    R$2.24
  • Build Plate

    OpenBuilds®

    Build Plate

    R$71.98
    Large format universal mounting platform.  Suitable for heated beds and any applications requiring larger mounting surface.  Compatible with all sizes of V-Slot Linear Rail. ...
    R$71.98
  • C-Beam® Gantry Plate

    OpenBuilds®

    C-Beam® Gantry Plate

    R$37.86
    Accommodates up to 4 mini v wheels.  Easily configured to station wheels inside  C-Beam Linear Rail track for a compact gantry cart footprint.  Alternate the mounting on slimmer...
    R$37.86
  • C-Beam® Riser Plates

    OpenBuilds®

    C-Beam® Riser Plates

    R$22.70
    A key component used to attach C-Beam Gantry Plates to a C-Beam Shield.   Pre-threaded holes and center recess allows for flush mounting a top plate.  Each set contains 2 riser plates...
    R$22.70
  • OpenBuilds®

    Cable Ties (10 Pack)

    R$1.86
    Cable Ties to keep the wires on your Build looking nice and neat. Product Features   Flexible to accommodate any need Strong fastener What is Included (10) Cable Ties Product...
    R$1.86
  • Cast Acrylic - Black

    OpenBuilds®

    Cast Acrylic - Black

    R$45.44
    Make some stunning projects with our Black Cast Acrylic sheets. They are perfectly suited for cnc router machining or laser cutting / engraving and are very popular in the sign and trophy industry as...
    R$45.44
  • Cast Acrylic - Blue

    OpenBuilds®

    Cast Acrylic - Blue

    R$45.44
    Make some stunning projects with our Blue Cast Acrylic sheets. They are perfectly suited for cnc router machining or laser cutting / engraving and are very popular in the sign and trophy industry as...
    R$45.44
  • Cast Acrylic - Clear

    OpenBuilds®

    Cast Acrylic - Clear

    R$45.44
    Make some stunning projects with our Clear Cast Acrylic sheets. They are perfectly suited for cnc router machining or laser cutting / engraving and are very popular in the sign and trophy industry as...
    R$45.44
  • Cast Acrylic - Green

    OpenBuilds®

    Cast Acrylic - Green

    R$45.44
    Make some stunning projects with our Green Cast Acrylic sheets. They are perfectly suited for cnc router machining or laser cutting / engraving and are very popular in the sign and trophy industry as...
    R$45.44
  • Cast Acrylic - Red

    OpenBuilds®

    Cast Acrylic - Red

    R$45.44
    Make some stunning projects with our Red Cast Acrylic sheets. They are perfectly suited for cnc router machining or laser cutting / engraving and are very popular in the sign and trophy industry as...
    R$45.44
  • Cast Acrylic - White

    OpenBuilds®

    Cast Acrylic - White

    R$45.44
    Make some stunning projects with our White Cast Acrylic sheets. They are perfectly suited for cnc router machining or laser cutting / engraving and are very popular in the sign and trophy industry...
    R$45.44
  • Cast Acrylic - Yellow

    OpenBuilds®

    Cast Acrylic - Yellow

    R$45.44
    Make some stunning projects with our Yellow Cast Acrylic sheets. They are perfectly suited for cnc router machining or laser cutting / engraving and are very popular in the sign and trophy industry...
    R$45.44
  • CNC USB controller Mk3/4 (4 axis)

    OpenBuilds®

    CNC USB controller Mk3/4 (4 axis)

    R$871.71
    USB to CNC is now a reality! CNC motion controller is a link between personal computer and drivers for stepper motors. It uses a USB port which is available on all modern computers and laptops...
    R$871.71
  • Cross Joining Plate

    OpenBuilds®

    Cross Joining Plate

    R$22.70
    Creates a junction with up to 4 Linear Rail.  Can be repositioned to suit your application.  Connect easily with 10mm Low Profile M5 Screw (sold separately)  Product...
    R$22.70
  • OpenBuilds®

    Delrin Mini V Wheel

    R$5.65
    The smooth and precise Delrin wheel works best for light load applications. Small and compact, designed specifically to ride inside the V Shaped profile of V-Slot Linear...
    R$5.65
  • Delrin Mini V Wheel Kit

    OpenBuilds®

    Delrin Mini V Wheel Kit

    R$16.26
    A complete kit that includes everything you need for assembly. The smooth and precise Delrin wheel works best for light load applications.  Small and compact, designed specifically to...
    R$16.26
  • OpenBuilds®

    Delrin V Wheel

    R$9.06
    The smooth and precise Delrin wheel works best for light load applications. Standard size provides smooth motion when paired with OpenBuilds Linear Rail. V Shaped profile...
    R$9.06
  • Delrin V Wheel Kit

    OpenBuilds®

    Delrin V Wheel Kit

    R$18.91
    A complete kit that includes everything you need for assembly. The smooth and precise Delrin wheel works best for light load applications.  Standard size provides smooth motion when...
    R$18.91
  • OpenBuilds®

    DeWALT DWP611 Compact Router

    R$526.80
    This is our go to router for most of our machines kits.  We have found that with the variable setting, we can quickly dial in any RPM changes needed for different material types...
    R$526.80
  • Double Tee Nut

    OpenBuilds®

    Double Tee Nut

    R$2.62
    Slide in Double Tee Nuts are a fundamental part of every build adding more flexibility to our system modularity.   Product Features Add any accessory or part along the length of a V-Slot...
    R$2.62
  • Double Wide Gantry Kit

    OpenBuilds®

    Double Wide Gantry Kit

    R$265.28
    For the most demanding builds, our C-Beam Double Gantry Set is the ideal Linear Actuator gantry where a strong, solid and stable operation is needed. This one is used on the Z Axis on our...
    R$265.28
  • DQ542MA Stepper Motor Driver

    OpenBuilds®

    DQ542MA Stepper Motor Driver

    R$151.57
    The DQ542MA Stepper Motor Driver is a type of two-phase hybrid stepping motor driver. It is designed for use with 2-phase hybrid stepper motor of all kinds with 42mm to 86mm outside diameter and...
    R$151.57
  • Drag Chain Cable Carrier

    OpenBuilds®

    Drag Chain Cable Carrier

    R$30.28
    This Drag / Cable Chaing Carrier is a great solution to tidy up the wires of your Builds. Product Features Easy open design that allows for direct tray access. Low profile size, non...
    R$30.28
  • Drill Taps

    OpenBuilds®

    Drill Taps

    R$32.18
    Get your driver/drill out and load it with any of our Drill Taps, this are specially good for tapping the ends of any of our V-Slot or C-Beams Linear Rail Fast. Pro-Tip: Be sure that your drill is...
    R$32.18
  • Drop In Tee Nuts

    OpenBuilds®

    Drop In Tee Nuts

    R$3.75
    Did you forget to add a Tee Nut? Drop In Tee Nuts are here to save you, just add them to any location on a V-Slot Linear Rail.   Product Features Add any accessory or part along the...
    R$3.75
  • Eccentric Spacer

    OpenBuilds®

    Eccentric Spacer

    R$7.54
    These Eccentric Spacers are the perfect solution for creating a pre-load from the V-Wheels to the V-Slot Linear Rail. Pro-Tip: Eccentric Spacers comes with a divot on the outside...
  • End Cap

    OpenBuilds®

    End Cap

    R$7.54
    Cover the bare end of V-Slot Linear Rail and give your Build that pro touch.  Each 20 x 20mm end cap features recessed center hole to flush mount an self tapping screw (not included). ...
    R$7.54
  • Flat Washer 1/4" Screw Size

    OpenBuilds®

    Flat Washer 1/4" Screw Size

    R$0.72
    Flat Washers come in handy when there a need to maintain distributed pressure among a surface.   Product Features Prevents damaging the surface being under pressure Ensure tightness and...
    R$0.72
  • Flexible Tubing Clamps

    OpenBuilds®

    Flexible Tubing Clamps

    R$3.37
    These are the clamps we use to firmly hold the Flexible Corrugated Tubing for short wire runs on our Builds. The rubber lining holds the tubing tightly while allow flex in the tube runs...
    R$3.37
  • OpenBuilds®

    G-H-O-S-T

    R$189.47
    Congratulations you are eligible to receive a free OpenBuilds BlackBox GhostCase! The BlackBox GhostCase is a special edition all white BlackBox case that will look amazing on your Openbuilds...
    R$189.47
  • GT2-2M Timing Belt - By the Foot

    OpenBuilds®

    GT2-2M Timing Belt - By the Foot

    R$9.44
    There is no limit to the types of linear motion you can create by making an actuator based on one of these GT2-2M Timing Belts.  They are popular for fast and lightweight movement. Product...
    R$9.44
  • GT2-2M Timing Belt Spool

    OpenBuilds®

    GT2-2M Timing Belt Spool

    R$1,440.24
    There is no limit to the types of linear motion you can create by making an actuator based on one of this GT2-2M Belts, popular for fast and lightweight movement. Product Features Precise...
    R$1,440.24
  • GT2-2M Timing Pulley - 30 Tooth

    OpenBuilds®

    GT2-2M Timing Pulley - 30 Tooth

    R$26.49
    This 30 Tooth GT2-2M Timing Pulley is great for any build but especially for those with high-resolution applications. Product Features Light and sturdy High accuracy position Smooth...
    R$26.49
  • Hex Standoff - M3 (4 Pack)

    OpenBuilds®

    Hex Standoff - M3 (4 Pack)

    R$2.62
    Purpose built and rigid, these nylon standoffs are threaded to accommodate M3 bolts and are designed for use with any application where M3 size standoffs are needed. A typical use for these standoffs...
  • Idler Pulley Plate

    OpenBuilds®

    Idler Pulley Plate

    R$26.49
    This plate gives you a mountable yet movable location for a Smooth Idler Pulley. This works great as it allows you to easily tension your belt. Product Features Quick assembly of motion...
    R$26.49
  • Inside Hidden Corner Bracket

    OpenBuilds®

    Inside Hidden Corner Bracket

    R$7.54
    These Inside Hidden Corner brackets are ideal for creating 90 degree connections between linear rails, making them not visible from the outside of the frame on your build. Product Features...
    R$7.54
  • OpenBuilds®

    IOT Switching Relay Power Strip

    R$106.09
    IOT Relay allows you to control an AC power outlet from a simple signal wire. This allows you to automatically turn on/off the AC power to devices on your system like vacuums and...
    R$106.09
  • Jog Knob

    OpenBuilds®

    Jog Knob

    R$18.91
    Attach our Jog Knobs to end the of a Lead Screw that’s part of an actuatorto manually fine tune your machines positions.   Product Features Can be used in a X/Y table...
    R$18.91
  • L Bracket

    OpenBuilds®

    L Bracket

    R$4.89
    These L Brackets provide a lot of flexibility.  They can be used to secure two components together at 90 degrees or as support for a spoiler board on a CNC Machine. Product Features Can...
  • Linear Actuator End Mount

    OpenBuilds®

    Linear Actuator End Mount

    R$41.65
    The ultimate end mount to build your horizontal and/or vertical NEMA 17 belt driven linear actuator.  Stamped and folded aluminum mount is best suited for 20X40mm V-Slot Linear Rail. Product...
    R$41.65
  • Lock Collar

    OpenBuilds®

    Lock Collar

    R$3.75
    Lock Collars are used to create mechanical stops at any location along a shaft or to secure components to it. A popular use is to lock the 8mm Lead Screw place. Product Features One piece for...
  • M3 Cap Head Screws

    OpenBuilds®

    M3 Cap Head Screws

    R$1.10
    These screws are high strength fasteners intended for demanding mechanical applications. As an example, we have used this this screw in combination with 1.5" Aluminum Spacers to...
  • Metal V Wheel

    OpenBuilds®

    Metal V Wheel

    R$29.15
    Crafted with carbon steel 45 to endure frequent usage with heavy duty materials such as hardened steel rails or round steel rod linear ways.    Product Features Precision...
    R$29.15
  • Metal V Wheel Kit

    OpenBuilds®

    Metal V Wheel Kit

    R$37.86
    A complete kit that includes everything you need for assembly. Crafted with carbon steel 45 to endure frequent usage with heavy duty materials such as hardened steel rails or round steel rod...
    R$37.86
  • Micro Fuse 10A

    OpenBuilds®

    Micro Fuse 10A

    R$1.86
    A standard Mini Blade Fuse, rated at 10A for protecting your OpenBuilds BlackBox Controller or other electronics.   Fits into standard APM/ATM Mini Fuse Holders only. For use with DC Low...
    R$1.86
  • Micro Limit Switch

    OpenBuilds®

    Micro Limit Switch

    R$7.54
    Our Micro Limit Switches are a basic part of any CNC build where homing, boundaries and security interlock are needed. Product Features Can be connected as NO or NC Small form...
    R$7.54
  • Micro Limit Switch Kit

    OpenBuilds®

    Micro Limit Switch Kit

    R$18.91
    Our Micro Limit Switches are a basic part of any CNC build where homing, boundaries and security interlocks are needed. Product Features Kit includes all parts needed for fast install Easily...
    R$18.91
  • Micro Limit Switch Plate

    OpenBuilds®

    Micro Limit Switch Plate

    R$7.54
    These Limit Switch Plates are designed for mounting to V-Slot Linear Rail or C-Beam Rail and give you multiple ways to mount and arrange your switches along the length of the linear guide...
    R$7.54
  • Mini Ball Bearing 105zz 5x10x4

    OpenBuilds®

    Mini Ball Bearing 105zz 5x10x4

    R$3.75
    These bearings are the center piece used on our Mini V Wheel Kits and also suitable for any other applications requiring a small diameter bearing   Product Features Rated to withstand as...
    R$3.75
  • Mini Heated Bed

    OpenBuilds®

    Mini Heated Bed

    R$37.86
    Small in size, big in power. Our Mini Heated Bed is a great option for any compact 3D printer build. Product Features Dual Side Ruler on surface as guide   What is Included (1)...
    R$37.86
  • Mini V Gantry Kit

    OpenBuilds®

    Mini V Gantry Kit

    R$125.04
    This Mini V Gantry Set is part of the Mini V Linear Actuator System to allow for quick assembly of lightweight machine builds where high speed is in order.   Product Features...
    R$125.04
  • Mini V Gantry Plate

    OpenBuilds®

    Mini V Gantry Plate

    R$34.07
    Professionally designed with time saving features.  Easy to mount with 5 pre-threaded M5 mounting holes. Belt loop notches for quick connection of timing belt.  Two oversized recessed...
    R$34.07
  • Mini V Wheel Precision Shim

    OpenBuilds®

    Mini V Wheel Precision Shim

    R$0.72
    These Precision Shims create the perfect fill and alignment on our Mini V Wheel Kits.   Product Features Reduce wear and prevents binding Creates a tighter fit among parts What is...
    R$0.72
  • Mounting Hub (5mm)

    OpenBuilds®

    Mounting Hub (5mm)

    R$15.12
    Create a simple Lead Screw Linear Actuator by attaching this Mounting Hub to any Linear Rail end or one of our Linear Actuator End Mount. What is Included (1) Mounting Hub (2) M5 Set...
    R$15.12
  • NEMA 17 Stepper Motor

    OpenBuilds®

    NEMA 17 Stepper Motor

    R$68.19
    This custom Openbuilds NEMA 17 Stepper Motor is a great choice for your lighter duty high precision CNC projects.   Product Features Plug and Play Xtension connector for easy...
    R$68.19
  • Out of stock
    NEMA 23 Stepper Motor

    OpenBuilds®

    NEMA 23 Stepper Motor

    R$106.09
    This custom Openbuilds NEMA 23 Stepper Motor it’s the stepper of choice for larger build requiring more power.   Product Features Plug and Play Xtension connector for easy and...
    R$106.09
  • Nylon Spacers (10 Pack)

    OpenBuilds®

    Nylon Spacers (10 Pack)

    R$7.54
    Nylon spacers are perfectly suited were non-conductive applications are needed and/or as standoff for electronic components. Product Features Achieve precise spacing between components Protect...