The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

CNC USB controller Mk3/4 (4 axis)

(No reviews yet) Write a Review
SKU:
955
UPC:
819368020748
  • CNC USB controller Mk3/4 (4 axis)
  • CNC USB controller Mk3/4 (4 axis)
  • CNC USB controller Mk3/4 (4 axis)
  • CNC USB controller Mk3/4 (4 axis)
  • CNC USB controller Mk3/4 (4 axis)
  • CNC USB controller Mk3/4 (4 axis)
€196.89

Description

USB to CNC is now a reality! CNC motion controller is a link between personal computer and drivers for stepper motors. It uses a USB port which is available on all modern computers and laptops. This is a complete (software/hardware) solution and it does NOT require any additional software (Mach3 is NOT needed). USB CNC controller is compatible with most step/dir drivers. It has the same pinout as popular PICStep and PMinMO drivers. It can be used as direct replacement for many parallel port break-out boards.

Please note: This is a USB breakout board that allows you to control stepper drivers using special (included) software and Stepper Motor Drivers will be needed to run the motors.

Product Details

  • Software License Included
  • 4 axes controller for stepper and servo motors
  • USB connection
  • 110 kHz maximum step frequency
  • 25 us pulse width, 50% duty cycle at higher frequencies
  • 3 digital outputs on board
  • 3 PWM capable outputs with selectable frequency (10Hz to 500kHz)
  • 3 outputs with support for RC servo motors
  • Jogging keyboard support with speed potentiometer, shift, step and spindle sync feature
  • 4 limit switches
  • 4 digital inputs on board, filtered and protected
  • Spindle encoder and index signal support for spindle synchronization
  • SD card support for running g-code without computer

You can connect the CNC USB controller Mk3/4 to the DQ542MA Stepper Motor Driver.  Installation instructions can be found here.

How to Activate Your License

- download and install latest software

http://planet-cnc.com/software/

- activate software using your license - open “License activation” dialog and paste your registration key.

Software Download Support: 

http://planet-cnc.com/software/

http://forum.planet-cnc.com/viewforum.php?f=5

User Manual: http://planet-cnc.com/wp-content/uploads/2016/03/CNCUSBControllerMk34.pdf

HOW TO SET UP A MACHINE USING THE CNC USB MK3/4 BOARD

OpenBuilds Part CAD Models and Drawings

View AllClose