The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

Components

Components

OpenBuilds high standards ensure that every part is the best it can be for your machine. Compatible with the entire OpenBuilds line of modular parts.

  • Dust Shoe

    Kent CNC

    Dust Shoe

    R$606.39
    Get the dust under control with this Dust Shoe. Simple yet very effective design will suck those material particles from the air and your work piece thanks to its integrated shop vac connector. No more excuses to have your shop full of dust...
    R$606.39
  • Flexible Tubing Clamps

    OpenBuilds®

    Flexible Tubing Clamps

    R$3.37
    These are the clamps we use to firmly hold the Flexible Corrugated Tubing for short wire runs on our Builds. The rubber lining holds the tubing tightly while allow flex in the tube runs on motion axis. Product Features Keeps cable...
    R$3.37
  • Rubber Feet Set (4 Pack)

    OpenBuilds®

    Rubber Feet Set (4 Pack)

    R$30.28
    These rubber feet are the perfect companion for any machine. They will keep your table free from scratches and prevent your machine from “walking around” while in operation. Product Features Can be mounted at any point along the length of...
    R$30.28
  • Star Grip Knob

    OpenBuilds®

    Star Grip Knob

    R$5.65
    This Star Grip Knobs are a great add on to our Adjustable Hinge creating fast and easy pivotal points with hand tight adjustment. Product Features Create jog stops in secondsCan be placed along the length of the rail (Tee Nut required) Compatible...
    R$5.65
  • NEW
    Adjustable V-Slot  Hinge

    OpenBuilds®

    Adjustable V-Slot Hinge

    R$18.91
    The Adjustable hinges help expand your Build to include angled connections between Linear Rails giving you many more possibilities to accommodate a certain geometry. Product Features Break away tabs allow for greater flexibility and multiple mounting...
    R$18.91
  • Jog Knob

    OpenBuilds®

    Jog Knob

    R$18.91
    Attach our Jog Knobs to end the of a Lead Screw that’s part of an actuatorto manually fine tune your machines positions.   Product Features Can be used in a X/Y table setup Integrated set screw What is Included (1) Jog...
    R$18.91
  • Three Arm Knob

    OpenBuilds®

    Three Arm Knob

    R$9.44
    Three Arm Knobs are primarily used as hold down clamps for your CNC Machine but can also serve for any jig in your shop. Product Features Quick and easy adjustment Distributed hold down pressure (add a washer) What is Included (1) Three Arm...
    R$9.44
  • Mounting Hub (5mm)

    OpenBuilds®

    Mounting Hub (5mm)

    R$15.12
    Create a simple Lead Screw Linear Actuator by attaching this Mounting Hub to any Linear Rail end or one of our Linear Actuator End Mount. What is Included (1) Mounting Hub (2) M5 Set Screws Product Specifications Version - V1 L-21 x W-21 x...
    R$15.12
  • Lock Collar

    OpenBuilds®

    Lock Collar

    R$3.75
    Lock Collars are used to create mechanical stops at any location along a shaft or to secure components to it. A popular use is to lock the 8mm Lead Screw place. Product Features One piece for even distributed clamping force Integrated set screw...
  • 1/4" x 8mm Flexible Coupling

    OpenBuilds®

    1/4" x 8mm Flexible Coupling

    R$26.49
    Flexible couplings are used to transmit torque from a stepper motor to a lead screw, thus creating the movement in an actuator.   Product Features 5 degree flexibility helps with misalignment Independent screw to lock shafts Can reduce...
    R$26.49
  • End Cap

    OpenBuilds®

    End Cap

    R$7.54
    Cover the bare end of V-Slot Linear Rail and give your Build that pro touch.  Each 20 x 20mm end cap features recessed center hole to flush mount an self tapping screw (not included).  Use multiples to cap off wider V-Slot Linear Rail. Product...
    R$7.54
  • Cube Corner Connector

    Corner Connectors

    Cube Corner Connector

    R$13.23
    Cube Corner Connectors enable for some custom Builds by creating among other thing a 3 way connection between Linear Rails or other Parts.  It  can also be used to attach to the side of V-Slot Linear Rail to create a linear carriage. ...
    R$13.23
  • Black Angle Corner Connector

    Corner Connectors

    Black Angle Corner Connector

    R$11.33
    Black Angle Corner Connector are specifically made for attaching and securing accessories in a 90 degree configuration.   Product Features Can be placed along the length of the rail Compatible with V-Slot and C-Beam Linear Rails What is...
    R$11.33
  • Inside Hidden Corner Bracket

    OpenBuilds®

    Inside Hidden Corner Bracket

    R$7.54
    These Inside Hidden Corner brackets are ideal for creating 90 degree connections between linear rails, making them not visible from the outside of the frame on your build. Product Features Makes a sturdy connection Can be placed along the length...
    R$7.54
  • Cast Corner Bracket

    Corner Connectors

    Cast Corner Bracket

    R$5.65
    These Cast Corner Brackets are used to connect two V-Slot Linear Rails together for a 90 degree connection. "Mount this corner to V-Slot Linear Rail using M5x8mm Low Profile Screws and M5 Tee Nuts." Product Details Qty...
    R$5.65
  • V-Slot® Door Handle

    V-Slot®

    V-Slot® Door Handle

    R$9.44
    The V-Slot Door Handle can be attached directly onto V-Slot Linear Rail to add portability to your machine or can be incorporated as a handle on the door of your machine’s enclosure.   Product Features Strong grip makes it easy to carry...
    R$9.44
  • 5mm * 8mm Flexible Coupling

    OpenBuilds®

    5mm * 8mm Flexible Coupling

    R$26.49
    These Flexible couplings are used to transmit torque from a stepper motor to a lead screw, thus creating the movement in an actuator.   Product Features Adds approximately 5% flexibility to help with misalignment Independent screw to lock...
    R$26.49
  • L Bracket

    OpenBuilds®

    L Bracket

    R$4.89
    These L Brackets provide a lot of flexibility.  They can be used to secure two components together at 90 degrees or as support for a spoiler board on a CNC Machine. Product Features Can be placed along the length of the rail Oblong mounting...