null

The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

Electronics

Electronics

The power and complimentary electronics you need to get wired up. We have all the parts you need to complete your CNC Router/Mill, actuator or other builds. Technical support is always available in the OpenBuilds Community Forum.

  • XYZ Touch Probe Plus XYZ Touch Probe Plus

    Copper Pour™

    XYZ Touch Probe Plus

    $46,184.65
    You will get the perfect 0,0,0 results before starting your CNC operation with the new XYZ Touch Probe Plus.  It boasts high-quality nickel coated aluminum machined to 0.1mm (0.003") tolerance.  Fully integrated into the OpenBuilds...
    $46,184.65
  • CNC Electronics Bundle CNC Electronics Bundle

    OpenBuilds®

    CNC Electronics Bundle

    $257,344.65
    The Ultimate CNC Electronics Power Pack This kit comes with all the electronic parts you need to run a 3 axis CNC machine. The software needed to run your CNC machine is a service available to you, free of charge. This plug and play CNC electronics...
    $257,344.65
  • Xtension Wire Set - 4 Conductor Xtension Wire Set - 4 Conductor

    OpenBuilds®

    Xtension Wire Set - 4 Conductor

    $3,952.65
    Create any motor, limit, signal, or even power connections on your builds using this Xtension Wire.   Incorporating the Xtension ecosystem into your Build has never been easier as this cable is available in popular lengths that have been...
    $3,952.65
  • Xtension Wire Set - 3 Conductor Xtension Wire Set - 3 Conductor

    OpenBuilds®

    Xtension Wire Set - 3 Conductor

    $2,830.86
    Create any motor, limit, signal, or even power connections on your Builds using this Xtension Wire.   Incorporating the Xtension ecosystem into your Build has never been easier as this cable is available in popular lengths that have been...
    $2,830.86
  • BlackBox Motion Control System BlackBox Motion Control System

    Copper Pour™

    BlackBox Motion Control System

    $125,369.65
    Welcome to the future in CNC machine control.  Our all-in-one plug and play OpenBuilds BlackBox Motion Control System is revolutionizing CNC. CNC Routers, Plasma Cutters, Laser Cutters or any other CNC Machine – the BlackBox will handle the job...
    $125,369.65
  • Xtension Limit Switch Kit Xtension Limit Switch Kit

    Copper Pour™

    Xtension Limit Switch Kit

    $4,150.61
    Xtension Limit Switches are perfect on your CNC Build where homing, boundaries and security interlock are needed. The integrated Xtension Connector allows you to create an easy to connect plug and play system.   Product Features Onboard Noise...
    $4,150.61
  • PowerCase Kit PowerCase Kit

    Copper Pour™

    PowerCase Kit

    $14,510.65
    Cutting edge processes and techniques have been incorporated to make the PowerCase Kit a safe and ground breaking product.   MeanWell Power Supplies purchased through the OpenBuilds Part Store include this PowerCase Kit.  You would want to...
    $14,510.65
  • Xtension Wire By the Foot Xtension Wire By the Foot

    OpenBuilds®

    Xtension Wire By the Foot

    $270.55
    Create any motor, limit, signal, or even power connections on your Builds using the OpenBuilds Xtension System.  Incorporating the Xtension ecosystem into your Build has never been easier as this cable is available in custom lengths and...
    $270.55
  • Flexible Corrugated Tubing Flexible Corrugated Tubing

    Flexible Corrugated Tubing

    $587.29
    Conceal and organize all your electronic wires with our Flexible Corrugated Tubing.   Product Features Multiple color to choose form and personalize your build Easy mountable using Fexible Tubing Clamp   What is Included (1) Flexible...
    $587.29
  • Power Supply Wire - Standard Length Power Supply Wire - Standard Length

    OpenBuilds®

    Power Supply Wire - Standard Length

    $3,754.69
    This heavy duty 18 AWG cable allows you to connect your controller to your Power Supply.  This is the standard length included with each Power Supply Bundle.   This pre-cut, stripped and tinned cable comes with the male Power Supply...
    $3,754.69
  • USB Cable 2.0 - 5 Feet USB Cable 2.0 - 5 Feet

    USB Cable 2.0 - 5 Feet

    $3,292.78
    This high performing and reliable USB Cable provides a shielded design to reduce EMI/RFI interface, and incorporates ferrite bead to suppress high frequency EMI interference.   Product Features Include Ferrite bead to suppress high frequency EMI...
    $3,292.78
  • 24V Cooling Fan 24V Cooling Fan

    24V Cooling Fan

    $5,932.28
    Keep your controller and drivers cool with our 24v Cooling Fans.    Features Slimline Profile Great air volume What is Included (1) 24v Cooling Fan Product Specifications   60x60x11mm CFM 15.5 Brushless Sleeve Bearing 11 Fan...
    $5,932.28
  • Power Supply Wire Power Supply Wire

    OpenBuilds®

    Power Supply Wire

    $534.50
    This heavy duty 18 AWG cable allows you to connect your controller, Spindle/Router LED or any other electronics to your Power Supply.    Product Features Stranded for easy routing Custom lengths provided by the foot (up to 100...
    $534.50
  • Xtension Wire Set - 2 Conductor Xtension Wire Set - 2 Conductor

    OpenBuilds®

    Xtension Wire Set - 2 Conductor

    $1,973.03
    Create any motor, limit, signal, or even power connections on your builds using this Xtension Wire.   Incorporating the Xtension ecosystem into your Build has never been easier as this cable is available in popular lengths that have been...
    $1,973.03
  • Power Supply Connector Power Supply Connector

    OpenBuilds®

    Power Supply Connector

    $983.21
    These Power Supply Connectors make it easy to give your connection the full flow of power needed from your power supply to your controller.  Product Features Create a Plug and Play power connection Screw connector for a secure...
    $983.21
  • Xtension Connector Sets Xtension Connector Sets

    OpenBuilds®

    Xtension Connector Sets

    $1,115.19
    The OpenBuilds Xtension Connectors are the back bone of the the OpenBuilds Xtension Connection System.  These pluggable connectors also have screw terminals for complete creative control over the wiring on your Builds. Product Features Create a...
    $1,115.19
  • 12V/29A Meanwell Power Supply Bundle 12V/29A Meanwell Power Supply Bundle

    MeanWell

    12V/29A Meanwell Power Supply Bundle

    $39,585.90
    The MeanWell family of power supplies represent the very best in power supply units. This specialized ultra low profile Power Supply set comes equipped standard with the PowerCase Kit designed specially for OpenBuilds...
    $39,585.90
  • Drag Chain Cable Carrier Drag Chain Cable Carrier

    Drag Chain Cable Carrier

    $5,272.40
    This Drag / Cable Chaing Carrier is a great solution to tidy up the wires of your Builds. Product Features Easy open design that allows for direct tray access. Low profile size, non obtrusive on your build What is Included (1) Drag / Cable Chain...
    $5,272.40
  • IOT Switching Relay Power Strip

    Digital Loggers

    IOT Switching Relay Power Strip

    $18,469.90
    IOT Relay allows you to control an AC power outlet from a simple signal wire. This allows you to automatically turn on/off the AC power to devices on your system like vacuums and routers though the use of code (like gcode)  Product...
    $18,469.90
  • DeWALT DWP611 Compact Router

    Dewalt

    DeWALT DWP611 Compact Router

    $91,716.03
    This is our go to router for most of our machines kits.  We have found that with the variable setting, we can quickly dial in any RPM changes needed for different material types.   Product Features The two built in LED's are a big help...
    $91,716.03
  • 24V Meanwell Power Supply Bundle 24V Meanwell Power Supply Bundle

    OpenBuilds®

    24V Meanwell Power Supply Bundle

    $46,184.65
    The MeanWell family of power supplies represent the very best in power supply units. This specialized ultra low profile Power Supply set comes equipped standard with the PowerCase Kit designed specially for OpenBuilds...
    $46,184.65
  • Spindle / Router LED Light Ring Spindle / Router LED Light Ring

    Copper Pour™

    Spindle / Router LED Light Ring

    $6,922.09
    Add this LED Light Ring around your Spindle / Router to get better lighting either while working on a project or recording it.  Product Features Designed to fit our Router/Spindle Mount Provides additional lighting around your...
    $6,922.09
  • 6 ft. Power Cord 6 ft. Power Cord

    6 ft. Power Cord

    $3,490.74
    Standard 3 prong Power Cord used in various types of power supplies including our Meanwell. Product Features Thick Cable and neck to prevent from breaking   What is Included (1) 6 ft. Power Cord   Product Specifications 10 AWG 3...
    $3,490.74
  • Mini Heated Bed Mini Heated Bed

    Copper Pour™

    Mini Heated Bed

    $7,252.03
    Small in size, big in power. Our Mini Heated Bed is a great option for any compact 3D printer build. Product Features Dual Side Ruler on surface as guide   What is Included (1) Mini Heated Bed   Product Specifications Power 12V Side,...
    $7,252.03
  • NEMA 23 Stepper Motor - High Torque Series NEMA 23 Stepper Motor - High Torque Series

    OpenBuilds®

    NEMA 23 Stepper Motor - High Torque Series

    $29,027.90
    This custom Openbuilds NEMA 23 Stepper Motor with High Torque provides more holding power and strength to take any build to the next level.   Product Features Plug and Play Xtension connector for easy and fast install Flat shaft section for better...
    $29,027.90
  • Slot Cover / Panel Holder Slot Cover / Panel Holder

    Slot Cover / Panel Holder

    $785.25
    Place your personal design touch on your project by incorporating these sleek Slot Covers or use them to hide wires along the V-Slot channel and cover them up for a finished look. Product Features Prevents dust or shavings from accumulating in the...
    $785.25
  • NEMA 23 Stepper Motor NEMA 23 Stepper Motor

    OpenBuilds®

    NEMA 23 Stepper Motor

    $18,469.90
    This custom Openbuilds NEMA 23 Stepper Motor it’s the stepper of choice for larger build requiring more power.   Product Features Plug and Play Xtension connector for easy and fast install Flat shaft section for better torque   What...
    $18,469.90
  • NEMA 17 Stepper Motor NEMA 17 Stepper Motor

    OpenBuilds®

    NEMA 17 Stepper Motor

    $11,871.15
    This custom Openbuilds NEMA 17 Stepper Motor is a great choice for your lighter duty high precision CNC projects.   Product Features Plug and Play Xtension connector for easy and fast install Flat shaft section for better...
    $11,871.15
  • Cable Ties (10 Pack)

    Cable Ties (10 Pack)

    $521.30
    Cable Ties to keep the wires on your Build looking nice and neat. Product Features   Flexible to accommodate any need Strong fastener What is Included (10) Cable Ties Product Specifications 4" Length UV Resistant Plastic Color: Black All...
    $521.30
?