The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

Electronics

Electronics

The power and complimentary electronics you need to get wired up. We have all the parts you need to complete your CNC Router/Mill, actuator or other builds. Technical support is always available in the OpenBuilds Community Forum.

  • Xtension Wire Set - 4 Conductor

    OpenBuilds®

    Xtension Wire Set - 4 Conductor

    CHF5.70
    Create any motor, limit, signal, or even power connections on your builds using this Xtension Wire.   Incorporating the Xtension ecosystem into your Build has never been easier as this cable is available in popular lengths that have been...
    CHF5.70
  • Xtension Wire Set - 3 Conductor

    OpenBuilds®

    Xtension Wire Set - 3 Conductor

    CHF4.08
    Create any motor, limit, signal, or even power connections on your Builds using this Xtension Wire.   Incorporating the Xtension ecosystem into your Build has never been easier as this cable is available in popular lengths that have been...
    CHF4.08
  • BlackBox Motion Control System

    Copper Pour™

    BlackBox Motion Control System

    CHF161.71
    Welcome to the future in CNC machine control.  Our all-in-one plug and play OpenBuilds BlackBox Motion Control System is revolutionizing CNC. CNC Routers, Plasma Cutters, Laser Cutters or any other CNC Machine – the BlackBox will handle the...
    CHF161.71
  • Z Touch Plate

    Z Touch Plate

    CHF14.26
    Find the actual Z height with our Z Touch Plate. Pair it with our one touch procedure in the OpenBuilds CONTROL and no more eyeballing or using a paper sheet to get the correct distance. Features Find Z height fast and accurate Aluminum plate to...
    CHF14.26
  • Xtension Limit Switch Kit

    Copper Pour™

    Xtension Limit Switch Kit

    CHF5.98
    Xtension Limit Switches are perfect on your CNC Build where homing, boundaries and security interlock are needed. The integrated Xtension Connector allows you to create an easy to connect plug and play system.   Product Features Onboard Noise...
    CHF5.98
  • Micro Fuse 10A

    Micro Fuse 10A

    CHF0.47
    A standard Mini Blade Fuse, rated at 10A for protecting your OpenBuilds BlackBox Controller or other electronics.   Fits into standard APM/ATM Mini Fuse Holders only. For use with DC Low Voltage only. What is Included (1) Micro Fuse...
    CHF0.47
  • PowerCase Kit

    Copper Pour™

    PowerCase Kit

    CHF20.92
    Cutting edge processes and techniques have been incorporated to make the PowerCase Kit a safe and ground breaking product.   MeanWell Power Supplies purchased through the OpenBuilds Part Store include this PowerCase Kit.  You would want to...
    CHF20.92
  • Xtension Wire By the Foot

    OpenBuilds®

    Xtension Wire By the Foot

    CHF0.39
    Create any motor, limit, signal, or even power connections on your Builds using the OpenBuilds Xtension System.  Incorporating the Xtension ecosystem into your Build has never been easier as this cable is available in custom lengths and...
    CHF0.39
  • Flexible Corrugated Tubing

    Flexible Corrugated Tubing

    CHF0.85
    Conceal and organize all your electronic wires with our Flexible Corrugated Tubing.   Product Features Multiple color to choose form and personalize your build Easy mountable using Fexible Tubing Clamp   What is Included (1) Flexible...
    CHF0.85
  • Power Supply Wire - Standard Length

    OpenBuilds®

    Power Supply Wire - Standard Length

    CHF5.41
    This heavy duty 18 AWG cable allows you to connect your controller to your Power Supply.  This is the standard length included with each Power Supply Bundle.   This pre-cut, stripped and tinned cable comes with the male Power Supply...
    CHF5.41
  • USB Cable 2.0 - 5 Feet

    USB Cable 2.0 - 5 Feet

    CHF4.75
    This high performing and reliable USB Cable provides a shielded design to reduce EMI/RFI interface, and incorporates ferrite bead to suppress high frequency EMI interference.   Product Features Include Ferrite bead to suppress high frequency EMI...
    CHF4.75
  • 24V Cooling Fan

    24V Cooling Fan

    CHF8.55
    Keep your controller and drivers cool with our 24v Cooling Fans.    Features Slimline Profile Great air volume What is Included (1) 24v Cooling Fan Product Specifications   60x60x11mm CFM 15.5 Brushless Sleeve Bearing 11 Fan...
    CHF8.55
  • Spade Connector (10 Pack)

    Spade Connector (10 Pack)

    CHF0.94
    Female Crimp-on Spade terminal for use with our Micro Limit Switch or any other electronic connection.   Product Features Easy and secure connections   What is Included (1) Spade Connector (10 Pack)   Product Specifications 3...
    CHF0.94
  • Power Supply Wire

    OpenBuilds®

    Power Supply Wire

    CHF0.77
    This heavy duty 18 AWG cable allows you to connect your controller, Spindle/Router LED or any other electronics to your Power Supply.    Product Features Stranded for easy routing   What is Included (1) Power Supply Wire – by...
    CHF0.77
  • Xtension Wire Set - 2 Conductor

    OpenBuilds®

    Xtension Wire Set - 2 Conductor

    CHF2.84
    Create any motor, limit, signal, or even power connections on your builds using this Xtension Wire.   Incorporating the Xtension ecosystem into your Build has never been easier as this cable is available in popular lengths that have been...
    CHF2.84
  • Power Supply Connector

    OpenBuilds®

    Power Supply Connector

    CHF1.42
    These Power Supply Connectors make it easy to give your connection the full flow of power needed from your power supply to your controller.  Product Features Create a Plug and Play power connection Screw connector for a secure...
    CHF1.42
  • Xtension Connector Sets

    OpenBuilds®

    Xtension Connector Sets

    CHF1.61
    The OpenBuilds Xtension Connectors are the back bone of the the OpenBuilds Xtension Connection System.  These pluggable connectors also have screw terminals for complete creative control over the wiring on your Builds. Product Features Create a...
    CHF1.61
  • 12V/29A Meanwell Power Supply Bundle

    MeanWell

    12V/29A Meanwell Power Supply Bundle

    CHF57.07
    The MeanWell family of power supplies represent the very best in power supply units. This specialized ultra low profile Power Supply set comes equipped standard with the PowerCase Kit designed specially for OpenBuilds...
    CHF57.07
  • Drag Chain Cable Carrier

    Drag Chain Cable Carrier

    CHF7.60
    This Drag / Cable Chaing Carrier is a great solution to tidy up the wires of your Builds. Product Features Easy open design that allows for direct tray access. Low profile size, non obtrusive on your build What is Included (1) Drag / Cable Chain...
    CHF7.60
  • Digital Loggers

    IOT Switching Relay Power Strip

    CHF26.63
    IOT Relay allows you to control an AC power outlet from a simple signal wire. This allows you to automatically turn on/off the AC power to devices on your system like vacuums and routers though the use of code (like gcode)  Product...
    CHF26.63
  • Dewalt

    DeWALT DWP611 Compact Router

    CHF132.22
    This is our go to router for most of our machines kits.  We have found that with the variable setting, we can quickly dial in any RPM changes needed for different material types.   Product Features The two built in LED's are a big help...
    CHF132.22
  • 24V Meanwell Power Supply Bundle

    OpenBuilds®

    24V Meanwell Power Supply Bundle

    CHF66.58
    The MeanWell family of power supplies represent the very best in power supply units. This specialized ultra low profile Power Supply set comes equipped standard with the PowerCase Kit designed specially for OpenBuilds...
    CHF66.58
  • Spindle / Router LED Light Ring

    Copper Pour™

    Spindle / Router LED Light Ring

    CHF9.98
    Add this LED Light Ring around your Spindle / Router to get better lighting either while working on a project or recording it.  Product Features Designed to fit our Router/Spindle Mount Provides additional lighting around your...
    CHF9.98
  • 6 ft. Power Cord

    6 ft. Power Cord

    CHF5.03
    Standard 3 prong Power Cord used in various types of power supplies including our Meanwell. Product Features Thick Cable and neck to prevent from breaking   What is Included (1) 6 ft. Power Cord   Product Specifications 10 AWG 3...
    CHF5.03
  • Mini Heated Bed

    Copper Pour™

    Mini Heated Bed

    CHF10.45
    Small in size, big in power. Our Mini Heated Bed is a great option for any compact 3D printer build. Product Features Dual Side Ruler on surface as guide   What is Included (1) Mini Heated Bed   Product Specifications Power 12V Side,...
    CHF10.45
  • NEMA 23 Stepper Motor - High Torque Series

    OpenBuilds®

    NEMA 23 Stepper Motor - High Torque Series

    CHF41.85
    This custom Openbuilds NEMA 23 Stepper Motor with High Torque provides more holding power and strength to take any build to the next level.   Product Features Plug and Play Xtension connector for easy and fast install Flat shaft section for better...
    CHF41.85
  • Slot Cover / Panel Holder

    Slot Cover / Panel Holder

    CHF1.13
    Place your personal design touch on your project by incorporating these sleek Slot Covers or use them to hide wires along the V-Slot channel and cover them up for a finished look. Product Features Prevents dust or shavings from accumulating in the...
    CHF1.13
  • NEMA 23 Stepper Motor

    OpenBuilds®

    NEMA 23 Stepper Motor

    CHF26.63
    This custom Openbuilds NEMA 23 Stepper Motor it’s the stepper of choice for larger build requiring more power.   Product Features Plug and Play Xtension connector for easy and fast install Flat shaft section for better torque   What...
    CHF26.63
  • Micro Limit Switch

    OpenBuilds®

    Micro Limit Switch

    CHF1.89
    Our Micro Limit Switches are a basic part of any CNC build where homing, boundaries and security interlock are needed. Product Features Can be connected as NO or NC Small form factor   What is Included (1) Micro Limit Switch   Product...
    CHF1.89
  • Micro Limit Switch Kit

    OpenBuilds®

    Micro Limit Switch Kit

    CHF4.75
    Our Micro Limit Switches are a basic part of any CNC build where homing, boundaries and security interlocks are needed. Product Features Kit includes all parts needed for fast install Easily mount along the length on any V-Slot or C-Beam Can be...
    CHF4.75
  • NEMA 17 Stepper Motor

    OpenBuilds®

    NEMA 17 Stepper Motor

    CHF17.11
    This custom Openbuilds NEMA 17 Stepper Motor is a great choice for your lighter duty high precision CNC projects.   Product Features Plug and Play Xtension connector for easy and fast install Flat shaft section for better...
    CHF17.11
  • Cable Ties (10 Pack)

    CHF0.75
    Cable Ties to keep the wires on your Build looking nice and neat. Product Features   Flexible to accommodate any need Strong fastener What is Included (10) Cable Ties Product Specifications 4" Length UV Resistant Plastic Color: Black  
    CHF0.75