Cast Corner Bracket
These Cast Corner Brackets are used to connect two V-Slot Linear Rails together for a 90 degree connection.
- Qty. 1
- Dimensions: 20mm x 20mm x 17mm
- 4mm Wide T-Slot Tab
- Compatible with 20mm V-Slot Linear Rail
- Cast Aluminum
- Color: Silver
Pro-Tip: The Cast Corner Brackets have stand off teeth (great for locking into the slot). When mounted in this direction you would utilize an M8 Low Profile Screw and an M5 Tee Nut. If you need to use the Cast Corners perpendicular to the V-Slot Linear Rail you can either flip the M5 Tee Nut upside down in the track of the V-Slot Linear Rail (this will ensure that the screw will grab the threads of the M5 Tee Nut) or you can sand the tabs off the bottom of the Corner Connector.
Easy follow along assembly video - top notch awesome community support - open source files and documentation and examples.
All registered Trademarks, Logos and other Intellectual Property found on the Site or mentioned herein belong to their respective owners.
These cast corners are great for the CNC frames at Openbuilds. Their oval slots allow for some wiggle room during orientation and work well with their bolt heads.
Conforms to the 90 degree angle and is suitable for my application.
I am building a voron 2.4 and these are ideal for mounting the extrusions that the build plate attaches to.
These are ideal for use in corners to attach rail as well as gives great strength. A must have on your build.
They work great to make a strong inside corner joint.