24V Meanwell Power Supply Bundle
The MeanWell family of power supplies represent the very best in power supply units. This specialized ultra low profile Power Supply set comes equipped standard with the PowerCase Kit designed specially for OpenBuilds.
This unit delivers 24V-14.6A and is the perfect choice for the most demanding power hungry CNC routers or large 3D printers running multiple nema 23 motors and or large heated beds.
- Delivers 24V-14.6A, perfect choice for the most demanding power hungry builds
- Suitable for NEMA 23 Stepper Motors on Large CNC Routers or 3D Printers w/ large beds
- Included PowerCase clean wire management and safer operation
What is Included
- (1) 24V/14.6A Meanwell Power Supply
- (1) PowerCase Kit
- (1) Power Cord
- (1) 7' Power Supply Wire
- (2) Male Power Supply Connectors
- 215mm(~8.50") x 115mm(~4.5") x 30mm(~1.25")
- Voltage select switch 110V - 220V
- 3 DC Outputs
- Built-in Cooling Fan
- 85% Efficiency
- UL 60950-1 Approved
Easy follow along assembly video – top notch awesome community support – open source files and documentation and examples.
All registered Trademarks, Logos and other Intellectual Property found on the Site or mentioned herein belong to their respective owners.
Videos Hide Videos Show Videos
OK just got one of theses .. what can I say its a Meanwell Power supply Awesome! once again you get your moneys worth . This is what you definitely needed to go along with the Open Builds Little Black Box. This was a simple assembly and a low cost but effective solution its well thought out and made of aluminum. Assembly was very strait forward and can be done in less than 5 min watch the video and pay attention to what you see with the colored wires again nothing a pause cant handle. i would recommend this as one of the simple CNC builds out there. Once again Open Builds great job... Maybe construct an aluminum case to house the power supply and the Black Box Board in as a kit that would be very cool ;)
Once again great job Open Builds.
I purchased this along with the Blackbox as a replacement for an X-Controller that vanished during a move. Things happen for a reason. I was looking for cheaper alternatives and found Openbuilds. Wish I had found them before purchasing the X-Carve. I was hesitant that it wasn't an all-in-one plug and play like X-Controller but I felt like my options were broader with this. Even as a "newbie" this was super easy to setup. This thing powers everything without any problems. Never has felt like its being overworked. I will now be an Openbuilds customer for everything.
The short version is, it does exactly what it's supposed to do and that is provide steady voltage without letting anything weird happen to the machinery due to voltage sags. The cover is a neat addition and I wasn't expecting it until I had a bunch of parts left over from the 1010 build. One word of wisdom, check the red switch on the side of the unit and make sure it's set to 110 if nothing happens when you plug it in. Don't ask me how I know this. :-)
think is the nicest unboxing experience have had in a long time. everything securely wrapped in bubble wrap, all the components in individual bags along with tools and logos on everything. looks so more professional than usual dump it in a box approach. also helps that actual quality of components is very good and works well. recommendation would be to shorten wires from socket to power in a bit - have to squish wires in to get lh plate on. apart from that, great product. will be back
Wanted to give it 5 stars, but was difficult to find good docs/videos on assembly and pin setup. Otherwise, it's an awesome little power supply unit.