BlackBox Motion Control System X32
- SKU:
- CP-0005
- Maximum Purchase:
- 3 units
Description
High Performance
32-Bit Processor
Multi Machine Support
Easily configurable multiple Toolheads
4X
Powerful Independant
4 Axes Motor Drivers
Capable of True 2 / 3 / 4 AXES Motion Control
Multiple machine configuration supported: Cartesian, Polar, CoreXY and more...
Simplified Wiring
Easily connect all your machine
components with included
Xtension connectors
Connectivity
Multiple ways to control and execute operations
Free and Easy to use Software Tools are Included
giving you the Control to Unleash Your Creativity!
Product Specifications
Stepper Drivers:
- 4 x High Powered 4.0A (Peak) Stepper Drivers
- Up to 1/32nd Microstepping (Defaulted to 1/8 for higher torque)
- Built in Cooling solution / through airflow design
- Easy current adjustment
- Capable of true 2/3/4 axes motion control
- Rotary
- CoreXY
- Cartesian
- Polar
Outputs:
- Dual configurable onboard Relays for Plasmas, Spindles, etc
- Router (Enable) and VFD Spindle (Direction, Enable, 0-10v) Supported
- PWM Output for Lasers
- Servo Output for Pen Plotters
- Pick and Place solenoid VAC
- Controlled Air Assist
- Up to 24v 5A Switched Output for Coolant or LED devices
Inputs:
- 3x Optocoupled Endstop Inputs with power supply (5/24v). Suitable for passive or active mechanical, optical and inductive switches
- 1x Optocoupled XYZ Probe Input
- Door sensor input
Microcontroller:
- High performance 32 Bit Processor
- USB Interface for Plug and Play
- WIFI Support
- SD Card Support
Connectivity:
- WiFi
- USB
- SD
- Xtension System
- WEB UI
Mechanical:
- Easy V-Slot/C-Beam compatible mounting
- Dimensions: 171mm (Mounting flange included) x 80mm x 36.4mm
Compatibility:
- Supported by OpenBuilds CONTROL software
- Supports OpenBuilds Interface
- Supports GrblHAL Firmware
What is Included:
- BlackBox X32 Fully Assembled
- Xtension Connectors
- Mounting Hardware
- USB Cable
- SD Card
- INTERFACE Cable
This design or build includes CopperPour, LLC design work(s) shared Open Source under the CC BY-NC-SA 4.0 License Terms and Conditions
High Performance
32-Bit Processor
Multi Machine Support
Easily configurable multiple Toolheads
4X
Powerful Independant 4 Axes Motor Drivers
Capable of True 2 / 3 / 4 AXES Motion Control
Multiple machine configuration supported: Cartesian, Polar, CoreXY and more...
Simplified Wiring
Easily connect all your machine components
with included Xtension connectors
Connectivity
Multiple ways to control and execute operations
Free and Easy to use Software Tools are Included
giving you the Control to Unleash Your Creativity!
Product Specifications
Stepper Drivers:
- 4 x High Powered 4.0A (Peak) Stepper Drivers
- Up to 1/32nd Microstepping (Defaulted to 1/8 for higher torque)
- Built in Cooling solution / through airflow design
- Easy current adjustment
- Capable of true 2/3/4 axes motion control
- Rotary
- CoreXY
- Cartesian
- Polar
Outputs:
- Dual configurable onboard Relays for Plasmas, Spindles, etc
- Router (Enable) and VFD Spindle (Direction, Enable, 0-10v) Supported
- PWM Output for Lasers
- Servo Output for Pen Plotters
- Pick and Place solenoid VAC
- Controlled Air Assist
- Up to 24v 5A Switched Output for Coolant or LED devices
Inputs:
- 3x Optocoupled Endstop Inputs with power supply (5/24v). Suitable for passive or active mechanical, optical and inductive switches
- 1x Optocoupled XYZ Probe Input
- Door sensor input
Microcontroller:
- High performance 32 Bit Processor
- USB Interface for Plug and Play
- WIFI Support
- SD Card Support
Connectivity:
- WiFi
- USB
- SD
- Bluetooth
- Xtension System
- WEB UI
Mechanical:
- Easy V-Slot/C-Beam compatible mounting
- Dimensions: 171mm (Mounting flange included) x 80mm x 36.4mm
Compatibility:
- Supported by OpenBuilds CONTROL software
- Supports OpenBuilds Interface
- Supports GrblHAL Firmware
Whats Included:
Documentation:
This design or build includes OpenBuilds®, LLC design work(s) shared Open Source under the CC BY-SA 4.0 License Terms and Conditions
4 Reviews
-
Easy swap
Love itI had to replace my old controller board. It was an easy swap out and was a huge jump in features. Works with all my current software and took about 20 minutes in the electronics cabinet to get it all sorted.
-
Capable
I purchased this to replace the computer unit of my Millright CNC to enable 4axis milling. While I've not yet got to the point of configuring the 4 axis, the unit works well with the existing setup. Extremely capable unit. I had already transitioned my stepper motors to OpenBuilds High Torque motors to improve the systems movements. All in all quite impressed with the unit thus far. Still need to complete some calibration processes as some things are still not where I want it, but the fact that I have the ability and the system is as flexible as it is, I'm quite impressed.
-
BLACKBOX MOTION CONTROL SYSTEM X32
Everything I have received has been high quality and delivered fast!!! Haven't tried it - still building machine.
-
BLACKBOX MOTION CONTROL SYSTEM X32
I just received the package yesterday.I still need to install it.
Related Products
24V Meanwell Power Supply Bundle
OpenBuilds®
PowerCase Kit
Copper Pour™
CNC Electronics Bundle
OpenBuilds®
XYZ Touch Probe Plus
Copper Pour™
INTERFACE CNC Touch
Copper Pour™
