The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

Electronics

Electronics

The power and complimentary electronics you need to get wired up. We have all the parts you need to complete your CNC Router/Mill, actuator or other builds. Technical support is always available in the OpenBuilds Community Forum.

  • Z Touch Plate

    Z Touch Plate

    $14.99
    Find the actual Z height with our Z Touch Plate. Pair it with our one touch procedure in the OpenBuilds CONTROL and no more eyeballing or using a paper sheet to get the correct distance. Features Find Z height fast and accurate Aluminum plate to...
    $14.99
  • PowerCase Kit

    Copper Pour

    PowerCase Kit

    $19.99
    Cutting edge processes and techniques have been incorporated to make the PowerCase Kit a safe and ground breaking product.   Product Features Pre soldered necessary components ready for simple assembly  Covered power...
  • Xtension Wire  - Standard Lengths

    OpenBuilds

    Xtension Wire - Standard Lengths

    $2.99
    Create any motor, limit, signal, or even power connections on your Builds using this Xtension Wire.  Customizing the Xtension ecosystem has never been easier as this cable is available in standard lengths. This Xtension wire works great with...
  • Flexible Corrugated Tubing

    OpenBuilds

    Flexible Corrugated Tubing

    $0.79
    Conceal and organize all your electronic wires with our Flexible Corrugated Tubing.   Product Features Multiple color to choose form and personalize your build Easy mountable using Fexible Tubing Clamp   What is Included (1) Flexible...
  • OpenCase Mounting Kit

    OpenBuilds

    OpenCase Mounting Kit

    $28.99
    OpenBuilds OpenCase™ Mounting Kit is a universal controller board mounting kit for bare style circuit board controllers.   Product Features Designed to easily mount along the length on any V-Slot or C-Beam Open sides for easy wire...
  • Power Supply Wire - Standard Length

    OpenBuilds

    Power Supply Wire - Standard Length

    $5.49
    This heavy duty 18 AWG cable allows you to connect your controller to your Power Supply.  This is the standard length included with each Power Supply Bundle.   This pre-cut, stripped and tinned cable comes with the male Power Supply...
  • USB Cable 2.0 - 5 Feet

    OpenBuilds

    USB Cable 2.0 - 5 Feet

    $4.99
    This high performing and reliable USB Cable provides a shielded design to reduce EMI/RFI interface, and incorporates ferrite bead to suppress high frequency EMI interference.   Product Features Include Ferrite bead to suppress high...
    $4.99
  • 24V Cooling Fan

    OpenBuilds

    24V Cooling Fan

    $8.99
    Keep your controller and drivers cool with our 24v Cooling Fans.    Features Slimline Profile Great air volume What is Included (1) 24v Cooling Fan – By Size Product Specifications 60mm Version 60x60x11mm CFM 15...
  • Spade Connector (10 Pack)

    OpenBuilds

    Spade Connector (10 Pack)

    $0.99
    Female Crimp-on Spade terminal for use with our Micro Limit Switch or any other electronic connection.   Product Features Easy and secure connections   What is Included (1) Spade Connector (10 Pack)   Product...
    $0.99
  • Power Supply Wire

    OpenBuilds

    Power Supply Wire

    $0.29
    This heavy duty 18 AWG cable allows you to connect your controller, Spindle/Router LED or any other electronics to your Power Supply.    Product Features Stranded for easy routing   What is Included (1) Power Supply Wire...
    $0.29
  • Xtension Wire

    Xtension

    Xtension Wire

    $0.19
    Create any motor, limit, signal, or even power connections on your builds using this Xtension Wire.     Product Features Stranded for easy routing   What is Included (1) Power Supply Wire – by...
  • Power Supply Connector

    Power Supply Connector

    $1.49
    These Power Supply Connectors make it easy to give your connection the full flow of power needed from your power supply to your controller.  Product Features Create a Plug and Play power connection Screw connector for a secure...
  • Xtension Connectors

    Xtension

    Xtension Connectors

    $1.49
    The OpenBuilds Xtension Connectors are the back bone of the the OpenBuilds Xtension Connection System.  These pluggable connectors also have screw terminals for complete creative control over the wiring on your Builds.Product Features Create a Plug...
  • 12V/29A Meanwell Power Supply Bundle

    OpenBuilds

    12V/29A Meanwell Power Supply Bundle

    $59.99
    The MeanWell family of power supplies represent the very best in power supply units. This specialized ultra low profile Power Supply set comes equipped standard with the PowerCase Kit designed specially for OpenBuilds...
    $59.99
  • Drag Chain Cable Carrier

    OpenBuilds

    Drag Chain Cable Carrier

    $7.99
    This Drag / Cable Chaing Carrier is a great solution to tidy up the wires of your Builds. Product Features Easy open design that allows for direct tray access. Low profile size, non obtrusive on your build What is Included (1) Drag / Cable...
  • OpenBuilds

    IOT Switching Relay Power Strip

    $27.99
    IOT Relay allows you to control an AC power outlet from a simple signal wire. This allows you to automatically turn on/off the AC power to devices on your system like vacuums and routers though the use of code (like gcode)  Product...
    $27.99
  • DeWALT DWP611 Compact Router

    $138.99
    This is our go to router for most of our machines kits.  We have found that with the variable setting, we can quickly dial in any RPM changes needed for different material types.   Product Features The two built in LED's are a big...
    $138.99
  • 24V Meanwell Power Supply Bundle

    24V Meanwell Power Supply Bundle

    $69.99
    The MeanWell family of power supplies represent the very best in power supply units. This specialized ultra low profile Power Supply set comes equipped standard with the PowerCase Kit designed specially for OpenBuilds...
    $69.99
  • Dupont Xtension Cable

    Xtension

    Dupont Xtension Cable

    $5.99
    Easily extend the motor travel distance between your driver board and NEMA 17 Stepper Motor with the daisy-chainable OpenBuilds Xtension Cables. Product Features Dupont connector industry standardFeature 2 What is Included(1) Dupont...
    $5.99
  • Spindle / Router LED Light Ring

    OpenBuilds

    Spindle / Router LED Light Ring

    $9.99
    Add this LED Light Ring around your Spindle / Router to get better lighting either while working on a project or recording it.  Product Features Designed to fit our Router/Spindle Mount Provides additional lighting around your...
    $9.99
  • 6 ft. Power Cord

    6 ft. Power Cord

    $5.29
    Standard 3 prong Power Cord used in various types of power supplies including our MeanwellProduct FeaturesThick Cable and neck to prevent from breaking What is Included(1) 6 ft. Power Cord Product Specifications10 AWG3 ProngColor: Black
    $5.29
  • Mini Heated Bed

    OpenBuilds

    Mini Heated Bed

    $9.99
    Small in size, big in power. Our Mini Heated Bed is a great option for any compact 3D printer build.Product Features Dual SideRuler on surface as guide What is Included(1) Mini Heated Bed Product SpecificationsPower 12V Side, Resistance: +/- 3...
    $9.99
  • DQ542MA Stepper Motor Driver

    DQ542MA Stepper Motor Driver

    $39.99
    The DQ542MA Stepper Motor Driver is a type of two-phase hybrid stepping motor driver. It is designed for use with 2-phase hybrid stepper motor of all kinds with 42mm to 86mm outside diameter and less than 4.0A phase current.   This high...
    $39.99
  • Out of stock
    NEMA 23 Stepper Motor - High Torque Series

    NEMA 23 Stepper Motor - High Torque Series

    $43.99
    This custom Openbuilds NEMA 23 Stepper Motor with High Torque provides more hlding power and strength to take any build to the next level.   Product Features Plug and Play Xtension connector for easy and fast install Flat shaft section for...
    $43.99
  • CNC USB controller Mk3/4 (4 axis)

    OpenBuilds

    CNC USB controller Mk3/4 (4 axis)

    $229.99
    USB to CNC is now a reality! CNC motion controller is a link between personal computer and drivers for stepper motors. It uses a USB port which is available on all modern computers and laptops. This is a complete (software/hardware) solution and...
    $229.99
  • CNC xPRO V4 Controller Stepper Driver

    OpenBuilds

    CNC xPRO V4 Controller Stepper Driver

    $149.99
    The xPRO V4 Controller Stepper Driver its an all in one controller with all the necessary features to get you up and running in your build quickly and reliably Product Features Introduced with the V4 is our...
    $149.99
  • Slot Cover / Panel Holder

    OpenBuilds

    Slot Cover / Panel Holder

    $0.99
    Place your personal design touch on your project by incorporating these sleek Slot Covers or use them to hide wires along the V-Slot channel and cover them up for a finished look. Product Features Prevents dust or shavings from accumulating in the...
  • Out of stock
    NEMA 23 Stepper Motor

    OpenBuilds

    NEMA 23 Stepper Motor

    $27.99
    This custom Openbuilds NEMA 23 Stepper Motor it’s the stepper of choice for larger build requiring more power.  Product Features Plug and Play Xtension connector for easy and fast installFlat shaft section for better torque What is...
    $27.99
  • Micro Limit Switch

    OpenBuilds

    Micro Limit Switch

    $1.99
    Our Micro Limit Switches are a basic part of any CNC build where homing, boundaries and security interlock are needed.Product Features Can be connected as NO or NCSmall form factor What is Included(1) Micro Limit Switch Product...
    $1.99
  • Micro Limit Switch Kit

    OpenBuilds

    Micro Limit Switch Kit

    $4.99
    Our Micro Limit Switches are a basic part of any CNC build where homing, boundaries and security interlocks are needed. Product Features Kit includes all parts needed for fast installEasily mount along the length on any V-Slot or C-BeamCan be connected...
    $4.99
  • Out of stock
    NEMA 17 Stepper Motor

    OpenBuilds

    NEMA 17 Stepper Motor

    $17.99
    This custom Openbuilds NEMA 17 Stepper Motor is a great choice for your lighter duty high precision CNC projects.  Product Features Plug and Play Xtension connector for easy and fast installFlat shaft section for better torque What is...
    $17.99
  • OpenBuilds

    Cable Ties (10 Pack)

    $0.49
    Cable Ties to keep the wires on your Build looking nice and neat. Product Features   Flexible to accommodate any need Strong fastener What is Included (10) Cable Ties Product Specifications 4" Length UV Resistant Plastic Color:...
    $0.49