Digital Loggers

IOT Switching Relay Power Strip

(18 reviews) Write a Review
IOT Relay
Maximum Purchase:
1 unit
  • Digital Loggers IOT Switching Relay Power Strip  2445


IOT Relay allows you to control an AC power outlet from a simple signal wire. This allows you to automatically turn on/off the AC power to devices on your system like vacuums and routers though the use of code (like gcode) 

Product Features

  • Universal control voltage 3-60VDC or 12-120VAC connects to Arduino, Raspberry Pi, PIC or other micro. Or connect directly to a 12V to 48VDC or even 120VAC circuit.
  • The durable SPDT control relay is rated at 30/40A, >400,000 operations at 12A or 2 million+ operations at 5A. A 12A thermal safety circuit breaker switch prevents overloads.
  • A single input signal switches three outlets: one normally on, two normally off. One always-on outlet is provided. Optical isolation, relay hysteresis and de-bounce protection add safety. A large MOV clamps surges for clean 90-140VAC power.

What is Included

  • (1) IOT Switching Relay Power Strip 120v

Product Specifications

  • High voltage wiring and safety hazards are eliminated.
  • Not a kit. Be up and running in minutes.
  • Standard 24" C-13 detachable cord included free, cords up to 25' are optional.
  • Version 2 adds higher isolation voltage, un-switched outlet and mounting tabs.
  • Professionally built and tested. 
Easy follow along assembly video – top notch awesome community support – open source files and documentation and examples.

Product of Digital Loggers - All registered Trademarks, Logos and other Intellectual Property found on the Site or mentioned herein belong to their respective owners.

View AllClose

18 Reviews

  • 4
    Switching Relay

    Posted by Dennis Black on May 21st 2024

    Works great!

  • 5
    IOT Switch

    Posted by Jim Reitz on Aug 1st 2023

    Works perfectly. Used to control CNC Router. Thinkin' it'll work fine, last a long time, and not rust or collect dust. Well maybe collect a little dust.

  • 4
    Power strip

    Posted by Dan Fabec on Jul 4th 2023

    Works great be nice if it had a 12mm screw port for the IO connection

  • 5

    Posted by Housspin on Jun 22nd 2023

    Highly recommended

  • 5

    Posted by John McCormick on Feb 12th 2022

    I bought this switch when I bought my Blackbox controller. It was just plug and play when used with the Blackbox controller. I have since tried to use the relay with other controllers and was not successful in finding an appropriate pin to use (I am not an electrician so this fault falls on me.) I use it as a main switch for my setup even though Openbuilds recommends only using it to control power to the router. I highly recommend it.

View AllClose