Description
The RoutER11 is a one of kind, groundbreaking design upgrading a router by incorporating high quality features.
It’s ready to take on all of your CNC tasks and projects with its precise ER11 Collet, high quality bearings, powerful one horse motor, ESC-Constant Speed control system and quiet smooth operation that is easy to use, affordable and produces precise, quality cuts.
Features
- 6 Speed dial for fine tuning RPM
- ESC-Constant Speed Control System (maintains a consistent speed regardless of the resistance.)
- ER11 Collet with wide range of bits support - 0.020" to 0.3125" [ Includes ER11 Collets 1/8", 1/4", 3mm, 6mm]
- Super low runout
- (1) RoutER11
- (1) ER11 Type A Nut
- (4) ER11 Collets 1/8", 1/4", 3mm, 6mm
- (1) Router Reduction Sleeve (71mm to 65mm)
- (1) Nut Wrench
- (2) Sets of Brushes
- (1) User Manual
- Collet Type: ER11
- 110V/60Hz US / 230V/50Hz EU
- 1 HP Motor
- 10K - 32k RPM US / 13K - 33K EU
- Long 9' cord
- Snap-On Ferrite RFI EMI Noise Filter Suppressor
- 65mm Diameter Body
- Noise level setting #1 approx 74.7dB - No Load
Product of Gearish, LLC - All registered Trademarks, Logos and other Intellectual Property found on the Site or mentioned herein belong to their respective owners.
15 Reviews
-
Router
Router works as designed. Never had a 1hp router before . I believe feeds and speeds are important on this router. There is a list available for different bits which is great but wood types need to be factored in as different densities have different effects.
-
Very Impressive
Now I have not got a chance to cut any material with the RoütER11 as by build is a work in progress. The main thing that I was concerned about was run out, given I used to work as a machinist. My first attempt turned out sub-par for my needs. Believing it to be the ER11 collet nut having a bad inside taper, I reached out to support and got an ER11 nut and a 1/8" ER11 collet. With that I found it to be just the collet and now the RoütER11 really shined. Using a 1/8" gage pin was able to measure just 0.0005" +/- 0.0005" with my Brown & Sharp test indicator. Very impressive, and what that translates into is less vibration, less noise, less tool wear and longer bearing life.
-
ER 11
Love it, should have purchased one a long time ago!
-
very accurate unit . measured runout is is extremely small . Probably .001
Very pleased but would like to know if brushes are available. I know that it comes with 2 sets but I plan to use it for years.
-
Router11 CNC Kit
Replaced router with standard collet and bad speed control. The ER11 Collet is a great up grade. At first was concerned as collet temperature seemed hot to touch on short run. But after first run of more than an hour the temp never exceeded 95 deg f.
Related Products
Aluminum 6061-T6 1/8"
OpenBuilds Materials
3D Sign Maker DELUXE 7 Pc CNC Bit Kit V1
SharkBits
Router/Spindle LED Light Ring
Copper Pour™
Metal/Plastic Cutting/3D Milling 4 Pc CNC Bit Kit V2
SharkBits
