The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

BlackBox Motion Control System

(41 reviews) Write a Review
SKU:
2790-Kit
UPC:
819368027730
  • BlackBox Motion Control System
  • BlackBox Motion Control System
  • BlackBox Motion Control System
  • BlackBox Motion Control System
  • BlackBox Motion Control System
  • BlackBox Motion Control System
£138.32

Description

Welcome to the future in CNC machine control.  Our all-in-one plug and play OpenBuilds BlackBox Motion Control System is revolutionizing CNC.

CNC Routers, Plasma Cutters, Laser Cutters or any other CNC Machine – the BlackBox will handle the job thanks to its multiple connection options. The OpenBuilds Xtension Wiring EcoSystem makes it super easy to connect with any tool head without comprising on security thanks to our multiple limit switches.

What is Included


  • 10 Amp Input Power Fuse
  • Configurable Relay for generic use cases (Plasma trigger, Coolant Pumps, Spindle control, etc )
  • Door Interlock signal connector to allow machines with enclosures to pause/resume when the door opens/closes
  • 4X High Powered 4.0A (peak) Stepper Drivers
  • Auxiliary Serial Input for alternative connectivity expansion
  • USB Interface for Plug and Play
  • Up to 24v 5A switched output for coolant devices such as 24v DC pumps, solenoids, contactors, or Solid State Relays
  • Input Power Polarity protection with indicator LED
  • 5v PWM and 5v Direction Spindle Signals
  • 0-10v Analog Spindle Control Signal Output for VFD Spindles

  • Plug and Play easy connectors that work directly with the OpenBuilds Xtension wiring ecosystem
  • 3 x Endstop inputs with optional power output (Selectable 5v/24v) for use with mechanical or powered
    switches such as Inductive sensor
  • Endstop inputs are protected against high voltages to allow for use of 24v Inductive Sensors
  • XYZ Probe input
  • Slave Axis configurable as a slave X, Y or Z
  • Up to 1/32 Micro stepping (Defaulted to 1/8 for higher Torque)

  • Easily reachable Current Adjustment Potentiometers
  • Power Switch (no more reaching for the power strip or unplugging)
  • Built in cooling solution/through airflow design

  • Powered by ATmega328p 8 bit Microcontroller running Grbl 1.1
  • All new high end Enclosure/Case included, with built in back-lit indication LEDs
  • Dimensions 171mm (mounting flange included) x 80mm x 36.4mm
  • Muscle & Brains boards stacked configuration
  • Easy V-Slot compatible Mounting
  • Well planned locations of all connectors to allow for logical cable management

  • OpenBuilds CONTROL for easy setup and configuration

Assembly / Support / Documentation:

OpenBuilds Support Docs Support OpenBuilds Support Docs

3D Model Resources:

Sketchup Files CAD Files
View AllClose

Product license information available here

41 Reviews

  • 5
    Great Controller

    Posted by BDWalker on Jan 8th 2020

    I am very happy with the BlackBox Motion Control System. It was easy to assemble and setup for my ACRO based laser engraver. The steppers run smoothly and quietly, and the firmware is easy to flash and configure using the OpenBuilds CONTROL software.

  • 5
    Blackbox is Awesome!

    Posted by Jason E on Jan 5th 2020

    I generally do not leave reviews, but decided to make an exception. I built my C-Beam XL in December of 2016 and used several control systems along the way. I decided to upgrade to the Blackbox controller after after years of frustration with "spit and baling wire" solutions (trying to save some hobby dollars). I'm sure I've spent well over the cost of 2 Blackbox controllers in the various configurations I've tried. Great job OpenBuilds! No wonder it's sold out so often.

  • 5
    Easy to setup with many options

    Posted by Michael Forte on Jan 2nd 2020

    I purchased the BlackBox to replace a Smoothieboard on my OX CNC. It was a simple replacement and the software was simple as well.
    The only issues I had was that the X-motor driver was not functioning. OpenBuilds sent a replacement out right away. The replacement had its own issues where I couldn’t connect to it using the USB. I tried the Brains board from the first kit and paired it with the muscle board from the replacement kit and everything is working fine now.
    My set up is using X, Y, and Z limit switches, X, Y, Y2, and Z motor drivers, a 400W spindle, a J Tech 2.8W laser, and Z probe.
    Normally, the issues I had would drop the rating by 1 star BUT OpenBuilds went out of their way to help me get up and running and all around the Christmas holiday. Easily a 5-star operation due to customer service and the ease of plug and play with the BlackBox. If I start another project, the BlackBox will be an easy choice as the controller.

  • 5
    Blackbox

    Posted by Crash on Dec 13th 2019

    The Blackbox motion control system just works when several other devices have caused me much grief. I am new to CNC and had almost given up on my project Thank you Openbuilds team

  • 5
    Nice Package

    Posted by Ira on Dec 12th 2019

    So I was able to put it together without reading the instructions making only a couple of tiny missteps, both of which would have been avoided if I'd installed the two long spacers to the proper board first. I've not connected it yet so I can't speak to that, but the packaging is very clever. If I was to make a suggestion for V2 it would be to put all of the connectors and switches on one side so it's easier to work on. I wan to mount it vertically and if I do that the connectors facing down are difficult to access. Also I'd have liked to see tbs on the side to mount it vertically. I have an original C-Beam and so far I don't see how to easily mount both this and the the power supply to the machine. Right now there is a Smoothie board and the power supply mounted to the back of the X axis but at first glance it does not appear this will fit. Minor quibble I know, but till I fire it up, that's all I've got. Lastly, I was reading the docs and the instructions for setting the 4 current pots seemed to be aimed at someone who already knows how to do it. Everything I've ever purchased from Openbuilds has been what was promised and I expect no less from this.

    Ira

View AllClose